参数资料
型号: 440EP
厂商: Applied Micro Circuits Corp.
英文描述: Power PC 440EP Embedded Processor
中文描述: 440EP的Power PC嵌入式处理器
文件页数: 61/84页
文件大小: 541K
代理商: 440EP
64
AMCC Proprietary
440EP – PPC440EP Embedded Processor
Revision 1.26 – April 25, 2007
Data Sheet
Spread Spectrum Clocking
Care must be taken when using a spread spectrum clock generator (SSCG) with the PPC440EP. This controller
uses a PLL for clock generation inside the chip. The accuracy with which the PLL follows the SSCG is referred to
as tracking skew. The PLL bandwidth and phase angle determine how much tracking skew there is between the
SSCG and the PLL for a given frequency deviation and modulation frequency. When using an SSCG with the
PPC440EP the following conditions must be met:
The frequency deviation must not violate the minimum clock cycle time. Therefore, when operating the
PPC440EP with one or more internal clocks at their maximum supported frequency, the SSCG can only lower
the frequency.
The maximum frequency deviation cannot exceed
3%, and the modulation frequency cannot exceed 40kHz.
In some cases, on-board PPC440EP peripherals impose more stringent requirements.
Use the Peripheral Bus Clock for logic that is synchronous to the peripheral bus since this clock tracks the
modulation.
Use the DDR SDRAM MemClkOut since it also tracks the modulation.
Notes:
1. The serial port baud rates are synchronous to the modulated clock. The serial port has a tolerance of
approximately 1.5% on baud rate before framing errors begin to occur. The 1.5% tolerance assumes that
the connected device is running at precise baud rates.
2. Ethernet operation is unaffected.
3. IIC operation is unaffected.
Important: It is up to the system designer to ensure that any SSCG used with the PPC440EP meets the above
requirements and does not adversely affect other aspects of the system.
相关PDF资料
PDF描述
440GP Power PC 440GP Embedded Processor
440GRX PowerPC 440GRx Embedded Processor
440GR Power PC 440GR Embedded Processor
440GX Power PC 440GX Embedded Processor
440SPE PowerPC 440SPe Embedded Processor
相关代理商/技术参数
参数描述
440E-P13045 制造商:ALLEN-BRADLEY 制造商全称:Allen-Bradley 功能描述:440H-P03035
440EPX 制造商:AMCC 制造商全称:Applied Micro Circuits Corporation 功能描述:PowerPC 440EPx Embedded Processor
440ES001B1434-4 功能描述:环形MIL规格后盖 CRIMIP RING ADPTR DC STRAIGHT RoHS:否 制造商:Amphenol PCD MIL 类型:MIL-DTL-38999 III, IV 系列:AS85049 产品类型:Environmental EMI/RFI Backshells 外壳类型:Straight 外壳大小:18 外壳材质:Aluminum Alloy
440ES031M1633-3B 功能描述:环形MIL规格后盖 BND/SHRNK BOOT ADPTR DC STRAIGHT BAND RoHS:否 制造商:Amphenol PCD MIL 类型:MIL-DTL-38999 III, IV 系列:AS85049 产品类型:Environmental EMI/RFI Backshells 外壳类型:Straight 外壳大小:18 外壳材质:Aluminum Alloy
440ES031M2003-3B 功能描述:环形MIL规格后盖 BND/SHRNK BOOT ADPTR DC STRAIGHT BAND RoHS:否 制造商:Amphenol PCD MIL 类型:MIL-DTL-38999 III, IV 系列:AS85049 产品类型:Environmental EMI/RFI Backshells 外壳类型:Straight 外壳大小:18 外壳材质:Aluminum Alloy