参数资料
| 型号： | 71M6541F-DB |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 51/166页 |
| 文件大小： | 0K |
| 描述： | DEMO BOARD 71M6541F |
| 标准包装： | 1 |
| 系列： | * |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页当前第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页第114页第115页第116页第117页第118页第119页第120页第121页第122页第123页第124页第125页第126页第127页第128页第129页第130页第131页第132页第133页第134页第135页第136页第137页第138页第139页第140页第141页第142页第143页第144页第145页第146页第147页第148页第149页第150页第151页第152页第153页第154页第155页第156页第157页第158页第159页第160页第161页第162页第163页第164页第165页第166页
71M6541D/F/G and 71M6542F/G Data Sheet
Table 41: Clock System Summary
Clock
Derived
From
Fixed Frequency or Range
PLL_FAST =1 PLL_FAST =0 Controlled by
Function
OSC
Crystal
32.768 kHz
–
Crystal clock
MCK
CKCE
CKADC
CKMPU
CKICE
Crystal/PLL
MCK
MCK
MCK
MCK
19.660800 MHz
(600*CK32)
4.9152 MHz
4.9152 MHz,
2.4576 MHz
4.9152 MHz …
307.2 kHz
9.8304 MHz…
614.4 kHz
6.291456 MHz
(192*CK32)
1.5728 MHz
1.572864 MHz,
0.786432 MHz
1.572864 MHz…
98.304 kHz
3.145728 MHz …
196.608 kHz
PLL_FAST
–
ADC_DIV
MPU_DIV[2:0]
MPU_DIV[2:0]
Master clock
CE clock
ADC clock
MPU clock
ICE clock
Optical
CKOPTMOD
MCK
38.40 kHz
38.6 kHz
–
UART
Modulation
CK32
MCK
32.768 kHz
–
32 kHz clock
2.5.4
Real-Time Clock (RTC)
2.5.4.1 RTC General Description
The RTC is driven directly by the crystal oscillator and is powered by either the V3P3SYS pin or the
VBAT_RTC pin, depending on the V3OK internal bit. The RTC consists of a counter chain and output
registers. The counter chain consists of registers for seconds, minutes, hours, day of week, day of
month, month, and year. The chain registers are supported by a shadow register that facilitates read
and write operations.
2.5.4.2 Accessing the RTC
Two bits, RTC_RD (I/O RAM 0x2890[6] ) and RTC_WR (I/O RAM 0x2890[7]) , control the behavior of the
shadow register.
When RTC_RD is low, the shadow register is updated by the RTC after each two milliseconds. When
RTC_RD is high, this update is halted and the shadow register contents become stationary and are suitable
to be read by the MPU. Thus, when the MPU wishes to read the RTC, it freezes the shadow register by
setting the RTC_RD bit, reads the shadow register, and then lowers the RTC_RD bit to let updates to the
shadow register resume. Since the RTC clock is only 500Hz, there may be a delay of approximately 2 ms
from when the RTC_RD bit is lowered until the shadow register receives its first update. Reads to RTC_RD
continue to return a one until the first shadow update occurs.
When RTC_WR is high, the update of the shadow register is also inhibited. During this time, the MPU may
overwrite the contents of the shadow register. When RTC_WR is lowered, the shadow register is written into
the RTC counter on the next 500Hz RTC clock. A change bit is included for each word in the shadow
register to ensure that only programmed words are updated when the MPU writes a zero to RTC_WR .
Reads of RTC_WR returns one until the counter has actually been updated by the register.
The sub-second register of the RTC, RTC_SBSC (I/O RAM 0x2892) , can be read by the MPU after the one
second interrupt and before reaching the next one second boundary. The RTC_SBSC register is expressed
as a count of 1/128 second periods remaining until the next one second boundary. Writing 0x00 to
RTC_SBSC resets the counter re-starting the count from 0 to 127. Reading and resetting the sub-second
counter can be used as part of an algorithm to accurately set the RTC.
The RTC is capable of processing leap years. Each counter has its own output register. The RTC chain
registers are not affected by the reset pin, watchdog timer resets, or by transitions between the battery
modes and mission mode.
Rev 4
51
相关PDF资料 |
PDF描述 |
|---|---|
| 71M6543F-DB-CT | DEMO BOARD 71M6543F-DB-CT |
| 72-CNV-5 | CONVERTER RS-232 TO RS-422 5V |
| 72346-001 | 72346-1-SCA-II REC |
| 72347-001LF | CONN RECEPT SCA2 20POS VERT PCB |
| 72436-001LF | 80POS EXT HT. REC SCA-2 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 71M6541F-IGT/F | 功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel |
| 71M6541F-IGTR/F | 功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel |
| 71M6541FT-IGT/F | 制造商:Maxim Integrated Products 功能描述:1-PHASE SOC, 64KB FLASH, PRES TEMP SENSOR - Rail/Tube |
| 71M6541FT-IGTR/F | 制造商:Maxim Integrated Products 功能描述:1-PHASE SOC, 64KB FLASH, PRES TEMP SENSOR - Tape and Reel |
| 71M6541G | 制造商:未知厂家 制造商全称:未知厂家 功能描述:71M6541D/71M6541F/71M6541G/71M6542F/71M6542G 是 TeridianTM 的第4 代高集成度单相电表SoC |
发布紧急采购，3分钟左右您将得到回复。