收藏本站
参数资料
型号： 71M6541F-DB
厂商： Maxim Integrated Products
文件页数： 40/166页
文件大小： 0K
描述： DEMO BOARD 71M6541F
标准包装： 1
系列： *
71M6541D/F/G and 71M6542F/G Data Sheet
Table 22: Timers/Counters Mode Description
M1
0
M0
0
Mode
Mode 0
Function
13-bit Counter/Timer mode with 5 lower bits in the TL0 or TL1 ( SFR
0x8A or SFR 0x8B ) register and the remaining 8 bits in the TH0 or TH1
( SFR 0x8C or SFR 0x8D ) register (for Timer 0 and Timer 1, respectively).
The 3 high order bits of TL0 and TL1 are held at zero.
0
1
1
0
Mode 1
Mode 2
16-bit Counter/Timer mode.
8-bit auto-reload Counter/Timer. The reload value is kept in TH0 or
TH1 , while TL0 or TL1 is incremented every machine cycle. When
TL( x) overflows, a value from TH( x) is copied to TL (x) (where x is 0
for counter/timer 0 or 1 for counter/timer 1.
1
1
Mode 3
If Timer 1 M1 and M0 bits are set to 1, Timer 1 stops.
If Timer 0 M1 and M0 bits are set to 1, Timer 0 acts as two independent
8-bit Timer/Counters.
In Mode 3, TL0 is affected by TR0 and gate control bits, and sets the TF0 flag on overflow, while TH0
is affected by the TR1 bit, and the TF1 flag is set on overflow.
Table 23 specifies the combinations of operation modes allowed for Timer 0 and Timer 1.
Table 23: Allowed Timer/Counter Mode Combinations
Timer 1
Mode 0
Mode 1
Mode 2
Timer 0 - mode 0
Timer 0 - mode 1
Timer 0 - mode 2
Yes
Yes
Not allowed
Yes
Yes
Not allowed
Yes
Yes
Yes
Table 24: TMOD Register Bit Description (SFR 0x89)
Bit
Symbol Function
Timer/Counter 1
TMOD[7]
TMOD[6]
Gate
C/T
If TMOD[7] is set, external input signal control is enabled for Counter 1. The
TR1 bit in the TCON register ( SFR 0x88 ) must also be set in order for Counter 1 to
increment. With these settings, Counter 1 increments on every falling edge of the
logic signal applied to one or more of the SEGDIO2-11 pins, as specified by the
contents of the DIO_R2 through DIO_R11 registers. See 2.5.8 Digital I/O and
LCD Segment Drivers and Table 47.
Selects timer or counter operation. When set to 1, a counter operation is performed.
When cleared to 0, the corresponding register functions as a timer.
TMOD[5:4] M1:M0
Timer/Counter 0:
Selects the mode for Timer/Counter 1, as shown in Table 22 .
TMOD[3]
TMOD[2]
Gate
C/T
If TMOD[3] is set, external input signal control is enabled for Counter 0. The
TR0 bit in the TCON register ( SFR 0x88 ) must also be set in order for Counter 0 to
increment. With these settings, Counter 0 is incremented on every falling edge of
the logic signal applied to one or more of the SEGDIO2-11 pins, as specified by
the contents of the DIO_R2 through DIO_R11 registers. See 2.5.8 Digital I/O and
LCD Segment Drivers and Table 47 .
Selects timer or counter operation. When set to 1, a counter operation is
performed. When cleared to 0, the corresponding register functions as a timer.
TMOD[1:0] M1:M0
40
Selects the mode for Timer/Counter 0 as shown in Table 22 .
Rev 4
相关PDF资料
PDF描述
71M6543F-DB-CT DEMO BOARD 71M6543F-DB-CT
72-CNV-5 CONVERTER RS-232 TO RS-422 5V
72346-001 72346-1-SCA-II REC
72347-001LF CONN RECEPT SCA2 20POS VERT PCB
72436-001LF 80POS EXT HT. REC SCA-2
相关代理商/技术参数
参数描述
71M6541F-IGT/F 功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6541F-IGTR/F 功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6541FT-IGT/F 制造商:Maxim Integrated Products 功能描述:1-PHASE SOC, 64KB FLASH, PRES TEMP SENSOR - Rail/Tube
71M6541FT-IGTR/F 制造商:Maxim Integrated Products 功能描述:1-PHASE SOC, 64KB FLASH, PRES TEMP SENSOR - Tape and Reel
71M6541G 制造商:未知厂家 制造商全称:未知厂家 功能描述:71M6541D/71M6541F/71M6541G/71M6542F/71M6542G 是 TeridianTM 的第4 代高集成度单相电表SoC
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*