- 您现在的位置：买卖IC网 > PDF目录19188 > MMA7660FCT (Freescale Semiconductor)ACCELEROMETER 3X3 DGTL 10-DFN PDF资料下载
参数资料
| 型号： | MMA7660FCT |
| 厂商： | Freescale Semiconductor |
| 文件页数： | 11/35页 |
| 文件大小： | 0K |
| 描述： | ACCELEROMETER 3X3 DGTL 10-DFN |
| 特色产品： | MMA7660 Digital Output Accelerometer |
| 标准包装： | 490 |
| 轴： | X，Y，Z |
| 加速范围： | ±1.5g |
| 灵敏度： | 21.33 计数/g |
| 电源电压： | 2.4 V ~ 3.6 V |
| 输出类型： | 数字 |
| 接口： | I²C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-VFDFN |
| 供应商设备封装： | 10-DFN（3x3） |
| 产品目录页面： | 2805 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页
CONFIGURABLE SAMPLES PER SECONDS AND INTERRUPT SETTINGS
The device can be configured into 8 different samples per seconds including: 1 sample/second, 2 samples/second,
4 samples/second, 8 samples/second, 16 samples/second, 32 samples/second, 64 samples/second, and 120 samples/second,
The user can specify the samples per second for their particular application, deciding on the trade off between power
consumption and number of samples, this can be configured in the SR (0x08) register. Once the user configurable samples per
second is chosen, the device will update the data for all 3 axes in the register at a resolution of 6-bits/axis.
The user can choose to enable/disable any of the following interrupts in the INTSU (0x06) register: Front/Back Interrupt,
Up/Down/Left/Right Interrupt, Tap Detection Interrupt, GINT (real-time motion tracking), Shake on X-axis, Shake on Y-axis, and
Shake on Z-axis. If the GINT is enabled, real-time motion tracking can be configured to trigger an interrupt after every sensor
data update: 1s (1 sample/second), 500 ms (2 samples/second), 250 ms (4 samples/second), 125 ms (8 samples/second),
62.5 ms (16 samples/second), 31.25 ms (32 samples/second), 15.625 ms (64 samples/second), or 8.36 ms (120 samples/
second). If any of the shake axis interrupts are enabled; excessive agitation, greater than 1.3 g, will trigger an interrupt. If either
the Up/Down/Left/Right Interrupt or the Front/Back Interrupt is enabled, any change in orientation will generate an interrupt. When
the Auto-Wake feature is enabled, and the Auto-Sleep counter elapses an interrupt will occur. When the device is in Auto-Sleep
state, if a shake interrupt, tap interrupt, Delta G, or orientation detection interrupt occur, the device will go out of sleep state and
into wake state.
POWER SAVING FEATURES
The MMA7660FC includes a range of user configurable power saving features. The device’s samples per second can be set
over a wide range from 1 to 120 samples a second; the operating current is directly proportional to samples per second. The
analog supply A VDD can be powered down to put the MMA7660FC into Off Mode, which typically draws 0.4 μA. The Auto-Wake/
Sleep feature can toggle the sampling rate from a higher user selected samples per second to a lower user selected samples
per second, changing based on if motion is detected or not. The user can choose to use any of the above options to configure
the part and make it have the optimal power consumption level for the desired application.
TESTING THE LOGIC CHAIN
MMA7660FC can be put into Test Mode, which disables accelerometer measurements and instead allows the user to write
6-bit values directly to the three axis data registers, thus simulating real time accelerometer measurements. The state machine
will respond to these values according to the enabled features and functions, allowing them to be validated.
NOTE: MMA7660FC does not include an accelerometer self test function, which is typically an electrostatic force applied
to each axis to cause it to deflect.
FEATURES
The Sensor employs both analog and digital filtering to ensure low noise and accurate output when using the part for Shake,
Tap, or Orientation Detection. During Active Mode, the data is filtered and stored for each of the 3 axes at the specified following
measurement intervals: 1s (1 sample/second), 500 ms (2 samples/second), 250 ms (4 samples/second),
125 ms (8 samples/second), 62.5 ms (16 samples/second), 31.25 ms (32 samples/second), 15.625 ms (64 samples/second), or
8.36 ms (120 samples/second) or indicated in AMSR [2:0].
The 6-bit measurement data is stored in the XOUT (0x00), YOUT (0x01), and ZOUT (0x02) registers and is used to update
the Shake, Alert, Tap, PoLa[2:0] (updates Up, Down, Left, and Right position), and BaFro[1:0] (updates Back and Front position)
in the TILT (0x03) register used for orientation detection. The customer can configure the part by enabling a number of user-
desired interrupts in the INTSU (0x06) register. Once the interrupts are enabled a change in filtered readings will cause an
interrupt to occur depending on the output.
The filters that are being used by this sensor is the analog filtering, digital noise filtering of measurements used for orientation
detection and updated in the XOUT (0x00), YOUT (0x01), and ZOUT (0x02) registers. The filtering method used is to oversample
each axis by taking 32 readings, and then calculate the average for the output measurement data as a finite impulse response
filter.
Table 6. Feature Summary Table
Feature
Orientation Change
Shake
Tap or Tilt
Auto-Wake/Sleep
X, Y, Z Data Update
Will Generate Interrupt
When FBINT, PLINT = 1
When SHINTX, SHINTY, SHINTZ = 1
When PDINT = 1
When ASINT = 1
When GINT = 1
NOTE: Sensor Measurements are NOT taken in Standby Mode or in Test Mode.
MMA7660FC
Sensors
11
Freescale Semiconductor, Inc.
相关PDF资料 |
PDF描述 |
|---|---|
| DPL04 | PIANO STYLE DIP SWITCH |
| 551-0307F | LED 3MM HIGH EFF YELLOW |
| 90GB10LT | SWITCH 10POS DIP AUTODIP |
| 550-0207F | LED 5MM RT ANGLE GREEN PC MNT |
| A6SN-4101-P | SWITCH DIP 4POS FLUSH ACT SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MMA7660FCT | 制造商:Freescale Semiconductor 功能描述:IC 3 AXIS ACCELEROMETER ?1.5G DFN-10 |
| MMA8104EG | 功能描述:加速计 - 板上安装 SOURCE ONLY RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C |
| MMA8104EGR2 | 功能描述:加速计 - 板上安装 Z-AXIS 40G W/CAP BOND RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C |
| MMA8104KEG | 功能描述:加速计 - 板上安装 SOURCE ONLY RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C |
| MMA8104KEGR2 | 功能描述:加速计 - 板上安装 Z-AXIS 40G W/CAP BOND RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C |
发布紧急采购，3分钟左右您将得到回复。