参数资料
型号: MC13783VKR2
厂商: Freescale Semiconductor
文件页数: 40/50页
文件大小: 0K
描述: IC PWR MNGMNT ATLAS 3G 247MAPBGA
标准包装: 1,500
应用: 手持/移动设备
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 247-TFBGA
供应商设备封装: 247-MAPBGA(10x10)
包装: 带卷 (TR)
Functional Description
4.4.2.3
Control
The ADC parameters are programmed by the processors via SPI. Locally on MC13783, the different ADC
requests are arbitrated and executed. When a conversion is finished, an interrupt is generated to the
processor which started the conversion.
4.4.2.3.1
Starting Conversions
The ADC will have the ability to start a series of conversions based on a rising edge of the ADTRIG signal
or directly initiated by SPI.
Once conversion is initiated all 8 channels will be sequentially converted and stored in registers or eight
conversions on one channel will be performed and stored. The conversion result can digitally be compared
with respect to a preset value for threshold detection.
The conversion will begin after a delay set between 0 and 8 ms. The delay between conversions can be
made equal to this delay.
To avoid that the ADTRIG input involuntarily triggers a conversion, a bit can be set which will make the
ADC ignores any transition on the ADTRIG pin.
4.4.2.3.2
Reading Conversions
Once a series of eight A/D conversions is complete, they are stored in one set of eight internal registers and
the values can be read out by software.
4.4.2.4
Pulse Generator
A SPI controllable pulse generator is available at ADOUT synchronized with the ADC conversion. This
pulse can be used to enable or drive external circuits only during the period of 4 or 8 ADC conversions.
4.4.2.5
4.4.2.5.1
Dedicated Channels Reading
Battery Current
Traditional battery capacity estimation is based on battery terminal voltage reading combined with
estimated phone current drain based on emitted PA power. For improved battery capacity estimation,
especially in non transmit mode like gaming, this method is too approximate. To improve the estimation,
the current out of the battery must be quantified more accurately. For this, on the MC13783, the current
flowing out of and into the battery can be read via the ADC by monitoring the voltage drop over the sense
resistor between BATT and BATTISNS.
4.4.2.5.2
Charge Current
The charge current is read by monitoring the voltage drop over the charge current sense resistor.
4.4.2.5.3
Battery Thermistor
If a battery is equipped with a battery thermistor, its value can be read out via the ADC input ADIN5. The
biasing and sensing circuit is entirely integrated and is only powered during the A to D conversions.
MC13783 Technical Data, Rev. 3.5
40
Freescale Semiconductor
相关PDF资料
PDF描述
M3AAK-1006R IDC CABLE - MSC10K/MC10M/MSC10K
HK060315NJ-T INDUCTOR HI FREQ 15NH 5% 0201
VI-B3V-EX CONVERTER MOD DC/DC 5.8V 75W
H3BWH-1418M IDC CABLE - HSR14H/AE14M/HPL14H
ECO-S2DB391CA CAP ALUM 390UF 200V 20% SNAP
相关代理商/技术参数
参数描述
MC1378FN 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:COLOR TELEVISION COMPOSITE VIDEO OVERLAY SYNCHRONIZER
MC1378P 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC138 制造商:TOKO 制造商全称:TOKO, Inc 功能描述:SELECTION GUIDE FOR STANDARD COILS
MC13820 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Low Noise Amplifier with Bypass Switch
MC13820FC 功能描述:IC W/NOISE AMPLIFIER BASE 12-QFN RoHS:否 类别:RF/IF 和 RFID >> RF 放大器 系列:- 标准包装:3,000 系列:- 频率:100MHz ~ 6GHz P1dB:9.14dBm(8.2mW) 增益:15.7dB 噪音数据:1.3dB RF 型:CDMA,TDMA,PCS 电源电压:2.7 V ~ 5 V 电流 - 电源:60mA 测试频率:2GHz 封装/外壳:0505(1412 公制) 包装:带卷 (TR)