- 您现在的位置：买卖IC网 > Datasheet目录610 > 9-1478239-0 (TE Connectivity)TOOL HAND CRIMPING TYPE N Datasheet资料下载
参数资料
| 型号： | 9-1478239-0 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/3页 |
| 文件大小： | 0K |
| 描述： | TOOL HAND CRIMPING TYPE N |
| 标准包装： | 1 |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 同轴，RF - N |
| 特点： | 侧面插入，棘齿 |
Crimping Tool Assembly
9-1478239-0
Instruction Sheet
408-8695
06 OCT 10 Rev B
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use
and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
Stationary Jaw
Nest Die
Anvil Die
Die Assembly
1583581-1
Moving Jaw
Figure 1
SDE-SA Hand Tool
Frame 9-1478240-0
NOTE
i
1. INTRODUCTION
This instruction sheet covers the use and maintenance
of Hex Crimp Die Assembly 1583581-1 used in SDE-
SA Hand Tool Frame 9-1478239-0. See Figure 1. The
entire assembly is referred to as Crimping Tool
9-1478239-0. The tool crimps various plug connectors
onto coaxial cable. See Figure 1 for a list of the
connector types and cable sizes the die set can crimp.
These dies were originally designed for GREENPAR
connectors.
Reason for revision may be found in Section 8,
REVISION SUMMARY.
All dimensions are in millimeters [with inches in
brackets]. Figures are drawn for identification only
and are not drawn to scale.
2. DESCRIPTION
See Figure 1.
Each die assembly consists of an nest die and an anvil
die. When closed, the dies form two crimping
chambers which crimp the center contact and ferrule
of the connector onto the coaxial cable. Each die is
held in the tool by a single screw.
3. DIE INSTALLATION
1. Close the tool handles until the ratchet
releases and then allow them to open fully.
2. See Figure 1 for normal orientation of the dies.
Insert the dies inside the tool jaws and align the
retaining screw holes.
?2010 Tyco Electronics Corporation, Berwyn, PA TOOLING ASSISTANCE CENTER 1-800-722-1111
All Rights Reserved PRODUCT INFORMATION 1-800-522-6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 3
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 9-1478240-0 | TOOL HAND CRIMPING SDE PEW 12 |
| 90017-3 | ASSY SAHT |
| 90026 | TOOL SHORT HANDLE 24-22AWG CRIMP |
| 90045 | DAHT F CRIMP 14-18 |
| 90050-1 | DAHT TAPER PIN 16-20 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 9-1478240-0 | 功能描述:折皱器 SDE PEW 12 HAND TOOL RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 9-1478242-0 | 功能描述:冲压机与冲模 PRO-C HEX DIE RG58-RG59-URM70 RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 9-1478243-0 | 功能描述:冲压机与冲模 PRO-C HEX DIE PSF 1/2-BEL8281 RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 9-1478245-0 | 功能描述:冲压机与冲模 PRO-C HEX DIE PSF1/7 RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 9-1478246-0 | 功能描述:冲压机与冲模 PRO-C HEX DIE RG9-RG214-URM90 RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
发布紧急采购，3分钟左右您将得到回复。