- 您现在的位置：买卖IC网 > PDF目录19196 > 58546-1 (TE Connectivity)TOOL CRIMP UNINSUL TERM 10-22AWG PDF资料下载
参数资料
| 型号： | 58546-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/5页 |
| 文件大小： | 0K |
| 描述： | TOOL CRIMP UNINSUL TERM 10-22AWG |
| 特色产品： | SOLISTRAND?, Budget, and DIAMOND GRIP? Terminals and Splices |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III, Solistrand |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 接头，10-22 AWG |
| 特点： | 侧面插入，棘齿 |
| 产品目录页面： | 384 (CN2011-ZH PDF) |
| 配用： | 8-330368-1-ND - CONN BUTT SPLICE UNINS 14-16AWG 328600-ND - CONN BUTT SPLICE UNINS 10-12AWG 8-31819-6-ND - CONN BUTT SPLICE UNINS 14-16AWG 8-330369-2-ND - CONN SPLICE SOLIS BUTT 12-10AWG 51893-ND - CONN SPLICE SOLISTRAND BUTT 2-321801-3-ND - CONN SPLICE BUTT 22-16AWG SOLIS 8-32151-1-ND - SPLICE,SOLIS BUTT 12-10AWG 326745-ND - CONN SPLICE BUTT 22-20AWG SOLIS 328592-ND - CONN SPLICE BUTT 18-16AWG STRAP 8-330367-1-ND - CONN SPLICE BUTT 22-16AWG TIN 更多... |
| 其它名称： | A9812 |
Figure 2
5. Insert the die retaining screw through the
The tool features a tool frame with a stationary jaw
and handle, a moving jaw, a moving handle, and an
adjustable ratchet that ensures full crimping.
The tool frame holds a die assembly with three
crimping chambers. The die assembly features an
upper die and a lower die. Die retaining screws are
used to position and secure the dies in the tool frame.
moving jaw and through the die. Tighten the screw
just enough to hold the die in place. Do not tighten
the screw completely at this time.
6. Carefully close the tool handles, making sure
that the anvils and indenters align properly.
Continue closing the tool handles until the ratchet
has engaged sufficiently to hold the dies in place,
then tighten both die retaining screws.
7. To disassemble, open the tool handles until the
ratchet releases, remove the two die retaining
screws, and slide the dies out of the tool jaws.
1. Open the tool handles and remove the two die
retaining screws from the tool jaws.
2. Place the upper die in the stationary jaw of the
tool frame so that the largest indenter is facing
inward. See Figure 2.
3. Insert the die retaining screw through the
stationary jaw and through the die. Tighten the
screw just enough to hold the die in place. Do not
tighten the screw completely at this time.
4. Place the lower die in the moving jaw of the tool
frame so that the largest anvil is facing inward. See
Figure 2.
Refer to Figure 1 and select wire of the specified size
and insulation diameter. Strip the wire to the length
indicated, taking care not to nick or cut wire strands.
Select an applicable splice and identify the
appropriate crimping chamber according to the wire
size markings on the dies. Refer to Figure 3 and
proceed as follows:
相关PDF资料 |
PDF描述 |
|---|---|
| 210-4ESD | SWITCH EXTENDED ACTUATOR 4 SEC |
| 210-4MSD | SWITCH RAISED ACTUATOR 4 SEC |
| 210-4LPSD | SWITCH SPST 4 SEC STRAIGHT TERM |
| 90758-1 | PROCRIMPER III W/DIE 22-26 AWG |
| YRS-859 | CRIMP TOOL STRIP FEED |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 58546-2 | 功能描述:折皱器 SOLIS 22-10AWG W/DIE AS (-1) RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 58547 | 制造商:Brady Corporation 功能描述: |
| 58548-1 | 功能描述:折皱器 PRO-CRIMPER W/DIE RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 58548-2 | 功能描述:冲压机与冲模 DIE ASSEMBLY RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 585-48-3 | 制造商:Fox Electronics 功能描述:SMD,3.2X2.5,HCMOS OSC,-40+85,100PPM,3.3V,48.0000 MHZ - Cut Tape Product |
发布紧急采购，3分钟左右您将得到回复。