参数资料
| 型号： | AD797BRZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 16/20页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP GP 110MHZ ULDIST 8SOIC |
| 标准包装： | 1 |
| 放大器类型： | 通用 |
| 电路数： | 1 |
| 转换速率： | 20 V/µs |
| 增益带宽积： | 110MHz |
| -3db带宽： | 8MHz |
| 电流 - 输入偏压： | 250nA |
| 电压 - 输入偏移： | 10µV |
| 电流 - 电源： | 8.2mA |
| 电流 - 输出 / 通道： | 50mA |
| 电压 - 电源，单路/双路(±)： | ±5 V ~ 15 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 管件 |
| 产品目录页面： | 772 (CN2011-ZH PDF) |
Data Sheet
AD797
Rev. J | Page 5 of 20
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
Ratings
Supply Voltage
±18 V
Input Voltage
±VS
Differential Input Voltage1
±0.7 V
Output Short-Circuit Duration
Indefinite within
maximum internal
power dissipation
Storage Temperature Range
(N, R Suffix)
65°C to +125°C
Operating Temperature Range
40°C to +85°C
Lead Temperature (Soldering 60 sec)
300°C
1
The AD797 inputs are protected by back-to-back diodes. To achieve low
noise, internal current-limiting resistors are not incorporated into the design
of this amplifier. If the differential input voltage exceeds ±0.7 V, the input
current should be limited to less than 25 mA by series protection resistors.
Note, however, that this degrades the low noise performance of the device.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
PIN CONFIGURATION
AD797
TOP VIEW
OFFSET NULL
1
–IN
2
+IN
3
–VS 4
DECOMPENSATION
AND DISTORTION
NEUTRALIZATION
+VS
OUTPUT
OFFSET NULL
8
7
6
5
00846-
001
Figure 2. 8-Lead Plastic Dual In-Line Package [PDIP] and
8-Lead Standard Small Outline Package [SOIC]
THERMAL RESISTANCE
θJA is specified for the device soldered on a 4-layer JEDEC
standard printed circuit board (PCB) with zero airflow for the
SOIC package, and a 2-layer JEDEC standard printed circuit
board (PCB) with zero airflow for the PDIP package.
Table 4. Thermal Resistance
Package Type
θJA
θJC
Unit
8-Lead SOIC (R-8)
120
43
°C/W
8-Lead PDIP (N-8)
103
50
°C/W
ESD CAUTION
相关PDF资料 |
PDF描述 |
|---|---|
| TMM-112-01-T-S | CONN HEADER 12POS SNGL 2MM T/H |
| TMM-111-01-T-S-SM | CONN HEADER 11POS SNGL 2MM SMD |
| TLW-110-06-T-S | CONN HEADER .100" 10POS SNGL TIN |
| TLW-110-05-T-S | CONN HEADER .100" 10POS SNGL TIN |
| TSW-112-23-T-D | CONN HEADER 24POS .100" DUAL TIN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD797BRZ-REEL | 功能描述:IC OPAMP GP 110MHZ ULDIST 8SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:150 系列:- 放大器类型:音频 电路数:2 输出类型:- 转换速率:5 V/µs 增益带宽积:12MHz -3db带宽:- 电流 - 输入偏压:100nA 电压 - 输入偏移:500µV 电流 - 电源:6mA 电流 - 输出 / 通道:50mA 电压 - 电源，单路/双路(±):4 V ~ 32 V，±2 V ~ 16 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:8-TSSOP 包装:管件 |
| AD797BRZ-REEL7 | 功能描述:IC OPAMP GP 110MHZ ULDIST 8SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:Excalibur™ 放大器类型:J-FET 电路数:1 输出类型:- 转换速率:45 V/µs 增益带宽积:10MHz -3db带宽:- 电流 - 输入偏压:20pA 电压 - 输入偏移:490µV 电流 - 电源:1.7mA 电流 - 输出 / 通道:48mA 电压 - 电源，单路/双路(±):4.5 V ~ 38 V，±2.25 V ~ 19 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:带卷 (TR) |
| AD797SQ/883B | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Voltage-Feedback Operational Amplifier |
| AD7980 | 制造商:AD 制造商全称:Analog Devices 功能描述:16-bit, 1 MSPS PulSAR ADC in MSOP/QFN |
| AD7980_13 | 制造商:AD 制造商全称:Analog Devices 功能描述:16-Bit, 1 MSPS PulSAR ADC in MSOP/QFN |
发布紧急采购，3分钟左右您将得到回复。