参数资料
型号: 71M6513H-DB
厂商: Maxim Integrated Products
文件页数: 73/112页
文件大小: 0K
描述: BOARD DEMO 71M6513H ENERGY METER
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 1
主要目的: 电源管理,电度表/功率表
嵌入式:
已用 IC / 零件: 71M6513H
已供物品: 2 个板,线缆,CD,电源
71M6513/71M6513H Demo Board User’s Manual
22
Item #
23
J7
Reference
Designator
J9
IC_IN
Name
NEUTRAL
Three-pin header for connecting the CT of the phase C.
Use
Spade connector on the back side of the PCB for connecting
the NEUTRAL wire.
24
JP16
VA_IN
Two-pin header. When the jumper is installed the on- board
power supply (AC signal) is used to power the demo board.
When not installed, the board must be powered by an external
supply connected to J1. Normally installed.
25
J16
LIVE
Line voltage input for phase C. This connector has a resistor
divider that leads to the VC pin on the chip that is the voltage
input to the ADC. This input is spade terminal on the bottom of
the board. Caution: High Voltage! Do not touch this
pin!
26
J6
VB_IN
Line voltage input for phase B. This connector has a resistor
divider that leads to the VB pin on the chip that is the voltage
input to the ADC. This input is spade terminal on the bottom of
the board. Caution: High Voltage! Do not touch this
pin!
27
J8
VA_IN
Line voltage input for phase A. This connector has a resistor
divider that leads to the VA pin on the chip that is the voltage
input to the ADC. This input is spade terminal on the bottom of
the board. Caution: High Voltage! Do not touch this
pin!
28
SW2
RESET
Chip reset switch: When the switch is pressed, the RESETZ
pin is pulled low, which resets the IC into a known state.
29
D6
VARS
Red LED. This LED functions as a pulse output for test and
calibration (VARh).
30
31
32
33
TP21
TP14
TP20
D5
V3P3, DIO7, GND
GND
V3P3, DIO6, GND
WATTS
This header provides access to the VARh pulse signal.
Ground test point
This header provides access to the Wh pulse signal.
Red LED. This LED functions as a pulse output for test and
calibration (Wh).
34
J1
5 Volt external
DC plug for connecting the external 5 VDC power supply.
supply
35
36
JP13,JP14,
JP15
J4
GND, DIO00,
DIO01, …, DIO021
DEBUG
Nine-pin header for monitoring the DIO00, DIO01, … to
DIO021 signals.
8X2 header for connecting the Debug Board.
Table 3-6: D6513T3D2 Demo Board Description
Page: 73 of 112
? 2005-2006 TERIDIAN Semiconductor Corporation
Revision 5.6
相关PDF资料
PDF描述
71M6515H-DB BOARD DEMO 71M6515H ENERGY METER
71M6521FE-DB BOARD DEMO FOR 71M6521FE
71M6531F-DB BOARD DEMO 71M6531F
71M6533-DB BOARD DEMO 71M6533
71M6534H-DB BOARD DEMO 71M6534H
相关代理商/技术参数
参数描述
71M6513H-IEL 制造商:未知厂家 制造商全称:未知厂家 功能描述:71M6513
71M6513H-IEL/F 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IELR 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IELR/F 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6513H-IGT/F 功能描述:计量片上系统 - SoC 3-Phase Energy Meter I/C RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel