参数资料
| 型号： | RP1-9V |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 5/5页 |
| 文件大小： | 0K |
| 描述： | RELAY RF SPDT 100MA 9V |
| 其它有关文件： | Standards Chart |
| 产品变化通告： | RP Relays Discontinuation Mar/2012 |
| 标准包装： | 50 |
| 系列： | RP |
| 继电器类型： | RF |
| 线圈类型： | 无锁存 |
| 线圈电流： | 15.6mA |
| 线圈电压： | 9VDC |
| 触点形式： | SPDT（1 C 型） |
| 触点额定值（电流）： | 100mA |
| 切换电压： | 30VDC - Nom |
| 关闭电压（最大）： | 6.75 VDC |
| 关闭电压（最小）： | 0.9 VDC |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 包装： | 管件 |
| 触点材料： | Silver（Ag），Gold（Au） |
| 操作时间： | 3ms |
| 释放时间： | 2ms |
| 线圈功率： | 140 mW |
| 线圈电阻： | 579 欧姆 |
| 工作温度： | -40°C ~ 70°C |
RP
NOTES
1. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different. The nominal operating voltage
should be applied to the coil for more
than 20 ms to set/reset the latching type
relay.
2. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or
malfunction.
5. Automatic mounting
To maintain the internal function of the
relay, the chucking pressure should
not exceed the values below.
Chucking pressure* in the direction A:
4.9 N {500 gf} or less
Chucking pressure* in the direction B:
9.8 N {1 kgf} or less
Chucking pressure* in the direction C:
9.8 N {1 kgf} or less
Please chuck the portion.
Avoid chucking the center of the relay. In
addition, excessive chucking pressure to
the pinpoint of the relay should be
avoided.
For general cautions for use, please
refer to the “General Application
Guidelines”.
B
3
3. External magnetic ?eld
Since RP relays are highly sensitive
polarized relays, their characteristics will
be affected by a strong external magnetic
A
(4)
(5)
(6)
C
mm inch
? Direction A ? Direction B ? Direction C
6 5 4
.118
6
?eld. Avoid using the relay under that
condition.
1
2
3
1 2 3
.236
4. Packing direction
Relays are packed in a tube with the
orientation stripe (PIN NO. 1) toward the
green stopper.
*Value of chucking pressure is shown by the value of weight
pressed on the portion (4 mm .157 inch dia.).
6. Soldering
Preheat according to the following
conditions.
Stopper (gray)
Stopper (green)
Temperature
120°C 248°F or less
Orientation (indicates PIN No.1) stripe
Time
Within 2 minute
Soldering should be done at 260±5°C
500±9°F within 6 s.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
ASCTB72E 201201-T
相关PDF资料 |
PDF描述 |
|---|---|
| 433111-13-0 | TERM BARRIER 13CIRC 1 ROW .4375 |
| 3001030 | BAG STATIC ZIP-TOP 10X30" 100PK |
| 430613-13-0 | TERM BARRIER 13CIRC 1 ROW .4375 |
| 65494-022LF | CONN IDC 60PIN PCB TIN |
| 430612-13-0 | TERM BARRIER 13CIRC 1 ROW .4375 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| RP1A090ZP | 制造商:ROHM 制造商全称:Rohm 功能描述:1.5V Drive Pch MOSFET |
| RP1A090ZP_1007 | 制造商:ROHM 制造商全称:Rohm 功能描述:1.5V Drive Pch MOSFET |
| RP1A090ZPTR | 功能描述:MOSFET Nch -12V -9A MOSFET RoHS:否 制造商:STMicroelectronics 晶体管极性:N-Channel 汲极/源极击穿电压:650 V 闸/源击穿电压:25 V 漏极连续电流:130 A 电阻汲极/源极 RDS（导通）:0.014 Ohms 配置:Single 最大工作温度: 安装风格:Through Hole 封装 / 箱体:Max247 封装:Tube |
| RP1A12 | 制造商:Master Electronic Controls (MEC) 功能描述: |
| RP1A12D | 制造商:Master Electronic Controls (MEC) 功能描述: |
发布紧急采购，3分钟左右您将得到回复。