参数资料
| 型号： | RP1-3V |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 5/5页 |
| 文件大小： | 0K |
| 描述： | RELAY RF SPDT 100MA 3V |
| 其它有关文件： | Standards Chart |
| 产品变化通告： | RP Relays Discontinuation Mar/2012 |
| 标准包装： | 50 |
| 系列： | RP |
| 继电器类型： | RF |
| 线圈类型： | 无锁存 |
| 线圈电流： | 46.7mA |
| 线圈电压： | 3VDC |
| 触点形式： | SPDT（1 C 型） |
| 触点额定值（电流）： | 100mA |
| 切换电压： | 30VDC - Nom |
| 关闭电压（最大）： | 2.25 VDC |
| 关闭电压（最小）： | 0.3 VDC |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 包装： | 管件 |
| 触点材料： | Silver（Ag），Gold（Au） |
| 操作时间： | 3ms |
| 释放时间： | 2ms |
| 线圈功率： | 140 mW |
| 线圈电阻： | 64.3 欧姆 |
| 工作温度： | -40°C ~ 70°C |
RP
NOTES
1. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different. The nominal operating voltage
should be applied to the coil for more
than 20 ms to set/reset the latching type
relay.
2. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or
malfunction.
5. Automatic mounting
To maintain the internal function of the
relay, the chucking pressure should
not exceed the values below.
Chucking pressure* in the direction A:
4.9 N {500 gf} or less
Chucking pressure* in the direction B:
9.8 N {1 kgf} or less
Chucking pressure* in the direction C:
9.8 N {1 kgf} or less
Please chuck the portion.
Avoid chucking the center of the relay. In
addition, excessive chucking pressure to
the pinpoint of the relay should be
avoided.
For general cautions for use, please
refer to the “General Application
Guidelines”.
B
3
3. External magnetic ?eld
Since RP relays are highly sensitive
polarized relays, their characteristics will
be affected by a strong external magnetic
A
(4)
(5)
(6)
C
mm inch
? Direction A ? Direction B ? Direction C
6 5 4
.118
6
?eld. Avoid using the relay under that
condition.
1
2
3
1 2 3
.236
4. Packing direction
Relays are packed in a tube with the
orientation stripe (PIN NO. 1) toward the
green stopper.
*Value of chucking pressure is shown by the value of weight
pressed on the portion (4 mm .157 inch dia.).
6. Soldering
Preheat according to the following
conditions.
Stopper (gray)
Stopper (green)
Temperature
120°C 248°F or less
Orientation (indicates PIN No.1) stripe
Time
Within 2 minute
Soldering should be done at 260±5°C
500±9°F within 6 s.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
ASCTB72E 201201-T
相关PDF资料 |
PDF描述 |
|---|---|
| OSTYK41320330 | CONN BARRIER STRIP 20CIRC 8.25MM |
| RP1-1.5V | RELAY RF SPDT 100MA 1.5V |
| OSTYK60612130 | CONN BARRIER STRIP 12CIRC 10MM |
| OSTYK44318030 | CONN BARRIER STRIP 18CIRC 9.50MM |
| GBSX-10 | TERM BARRIER 10CIRC SGL ROW .438 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| RP1-4.5V | 功能描述:高频/射频继电器 Hgh Frequen 1 Form C 1.8GHz 50ohm 1.0dB RoHS:否 制造商:Omron Electronics 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 VDC 线圈类型:Non-Latching 频率: 功耗:100 mW 端接类型:Solder Terminal 绝缘:20 dB to 30 dB at 1 GHz 介入损耗:0.2 dB at 1 GHz |
| RP14.7E1 | 制造商:RECOM 制造商全称:Recom International Power 功能描述:High Voltage Input/Output Series |
| RP14.7E1X1 | 制造商:RECOM 制造商全称:Recom International Power 功能描述:High Voltage Input/Output Series |
| RP14142G17 | 功能描述:通用继电器 2000-F RELAY RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| RP14142G2 | 功能描述:通用继电器 RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
发布紧急采购，3分钟左右您将得到回复。