参数资料
| 型号： | LT6402IUD-20#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 3/16页 |
| 文件大小： | 0K |
| 描述： | IC DIFF AMP/ADC DRVR 16-QFN |
| 标准包装： | 121 |
| 放大器类型： | 差分 |
| 电路数： | 2 |
| 输出类型： | 差分 |
| 转换速率： | 400 V/µs |
| -3db带宽： | 300MHz |
| 电流 - 输入偏压： | 5µA |
| 电压 - 输入偏移： | 1000µV |
| 电流 - 电源： | 30mA |
| 电流 - 输出 / 通道： | 35mA |
| 电压 - 电源，单路/双路(±)： | 4 V ~ 5.5 V，±2 V ~ 2.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-WFQFN 裸露焊盘 |
| 供应商设备封装： | 16-QFN-EP（3x3） |
| 包装： | 管件 |
11
640220fa
LT6402-20
APPLICATIO S I FOR ATIO
WU
U
Single-Ended to Differential Operation
The LT6402-20’s performance with single-ended inputs
is comparable to its performance with differential inputs.
This excellent single-ended performance is largely due
to the internal topology of the LT6402-20. Referring to
the block diagram, if the +INA and +INB pins are driven
with a single-ended signal (while –INA and –INB are tied
to AC ground), then the +OUT and –OUT pins are driven
differentially without any voltage swing needed from
amplier C. Single-ended to differential conversion using
more conventional topologies suffers from performance
limitations due to the common mode amplier.
Driving ADCs
The LT6402-20 has been specically designed to interface
directly with high speed Analog to Digital Converters
(ADCs). In general, these ADCs have differential inputs, with
an input impedance of 1kΩ or higher. In addition, there is
generally some form of lowpass or bandpass ltering just
prior to the ADC to limit input noise at the ADC, thereby
improving system signal to noise ratio. Both the unltered
and ltered outputs of the LT6402-20 can easily drive the
high impedance inputs of these differential ADCs. If the
ltered outputs are used, then cutoff frequency and the
type of lter can be tailored for the specic application if
needed.
Wideband Applications
(Using the +OUT and –OUT Pins)
In applications where the full bandwidth of the LT6402-20
is desired, the unltered output pins (+OUT and –OUT)
should be used. They have a low output impedance;
therefore, gain is unaffected by output load. Capacitance
in excess of 5pF placed directly on the unltered outputs
results in additional peaking and reduced performance.
When driving an ADC directly, a small series resistance
is recommended between the LT6402-20’s outputs and
the ADC inputs (Figure 4). This resistance helps eliminate
any resonances associated with bond wire inductances of
either the ADC inputs or the LT6402-20’s outputs. A value
between 10Ω and 25Ω gives excellent results.
Figure 3. Alternate Input Termination for Differential 50Ω
Input Impedance
6402 F03
IF IN–
IF IN+
LT6402-20
–INA
–INB
–OUT
+OUT
8
5
+INB
+INA
14
13
15
ZIN = 50
DIFFERENTIAL
16
100
6402 F04
LT6402-20
–OUT
+OUT
8
5
10
TO 25
10
TO 25
ADC
Figure 4. Adding Small Series R at LT6402 Output
Figure 2. Input Termination for Differential 50Ω Input Impedance
6402 F02
IF IN–
IF IN+
LT6402-20
–INA
–INB
–OUT
+OUT
8
5
+INB
+INA
14
13
15
49.9
ZIN = 50
DIFFERENTIAL
16
49.9
相关PDF资料 |
PDF描述 |
|---|---|
| SSQ-122-02-G-S-RA | CONN RCPT .100" 22POS R/A SGL AU |
| TMM-106-01-S-D-SM | CONN HEADER 12POS DUAL 2MM SMD |
| SSQ-123-02-G-S-RA | CONN RCPT .100" 23POS R/A SGL AU |
| TSW-143-17-T-D | CONN HEADER 86POS .100" DUAL TIN |
| TSW-147-17-G-S | CONN HEADER 47POS .100" SGL GOLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT6402IUD-6 | 制造商:LINER 制造商全称:Linear Technology 功能描述:300MHz Low Distortion, Low Noise Differential Amplifi er/ ADC Driver (AV = 6dB) |
| LT6402IUD-6#PBF | 功能描述:IC DIFF AMP/ADC DRVR 16-QFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:2 输出类型:满摆幅 转换速率:350 V/µs 增益带宽积:180MHz -3db带宽:320MHz 电流 - 输入偏压:12.5µA 电压 - 输入偏移:800µV 电流 - 电源:15mA 电流 - 输出 / 通道:85mA 电压 - 电源，单路/双路(±):2.5 V ~ 12.6 V，±1.25 V ~ 6.3 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-MSOP 包装:带卷 (TR) |
| LT6402IUD-6#TRPBF | 功能描述:IC DIFF AMP/ADC DVR 6DB 16-QFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:1 系列:- 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.028 V/µs 增益带宽积:105kHz -3db带宽:- 电流 - 输入偏压:3nA 电压 - 输入偏移:100µV 电流 - 电源:3.3µA 电流 - 输出 / 通道:12mA 电压 - 电源，单路/双路(±):2.7 V ~ 12 V，±1.35 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:14-TSSOP 包装:剪切带 (CT) 其它名称:OP481GRUZ-REELCT |
| LT6402IUD-6-PBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:300MHz Low Distortion, Low Noise Differential Amplifi er/ ADC Driver (AV = 6dB) |
| LT6402IUD-6-TR | 制造商:LINER 制造商全称:Linear Technology 功能描述:300MHz Low Distortion, Low Noise Differential Amplifi er/ ADC Driver (AV = 6dB) |
发布紧急采购，3分钟左右您将得到回复。