- 您现在的位置：买卖IC网 > PDF目录21409 > HP3-M-DC6V (Panasonic Electric Works)RELAY GEN PURPOSE 3PDT 10A 6V PDF资料下载
参数资料
| 型号： | HP3-M-DC6V |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 4/7页 |
| 文件大小： | 0K |
| 描述： | RELAY GEN PURPOSE 3PDT 10A 6V |
| 其它有关文件： | General Appl Guidelines Standards Chart |
| 标准包装： | 10 |
| 系列： | HP |
| 继电器类型： | 通用 |
| 线圈类型： | 无锁存 |
| 线圈电流： | 250mA |
| 线圈电压： | 6VDC |
| 触点形式： | 3PDT（3 C 型） |
| 触点额定值（电流）： | 10A |
| 切换电压： | 250VAC - 标称 |
| 关闭电压（最大）： | 4.8 VDC |
| 关闭电压（最小）： | 0.9 VDC |
| 安装类型： | 底座安装 |
| 端接类型： | 快速连接 - 0.187"（4.7mm） |
| 包装： | 散装 |
| 触点材料： | 银（Ag） |
| 操作时间： | 30ms |
| 释放时间： | 30ms |
| 线圈功率： | 1.5 W |
| 线圈电阻： | 24 欧姆 |
| 工作温度： | -50°C ~ 40°C |
HP
2. Speci?cations
Characteristics
Contact
Rating
Item
Arrangement
Contact resistance (Initial)
2 Form C, 3 Form C
Contact material
4 Form C
Nominal switching capacity
Min. switching capacity (Reference value)* 1
Insulation resistance (Initial)
Between open contacts
Speci?cations
2 Form C, 3 Form C, 4 Form C
Max. 15 m ? (By voltage drop 6 V DC 1A)
Ag
Ag alloy (cd free)
10A 250V AC (resistive load)
100mA 5V DC
Min. 100M ? (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,000 Vrms for 1min (2 Form C, 4 Form C).
2,000 Vrms for 1min (3 Form C) (Detection current: 10mA.)
Electrical
characteristics
Breakdown voltage
(Initial)
Between contact sets
Between contact and coil
1,500 Vrms for 1min (2 Form C, 4 Form C).
2,000 Vrms for 1min (3 Form C) (Detection current: 10mA.)
1,500 Vrms for 1min (2 Form C, 4 Form C).
2,000 Vrms for 1min (3 Form C) (Detection current: 10mA.)
Temperature rise (coil)
Operate time* 2
Release time* 2
Max. 65 ° C 149 ° F (By temperature method, at 40 ° C, nominal current)
Max. 25ms (2 Form C), Max.30ms (3 Form C, 4 Form C)
(Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 25ms (2 Form C), Max.30ms (3 Form C, 4 Form C)
(Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode)
Mechanical
characteristics
Shock resistance
Vibration resistance
Functional
Destructive
Functional
Destructive
Min. 98 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10 μ s.)
Min. 980 m/s 2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1 mm (Detection time: 10 μ s.)
10 to 55 Hz at double amplitude of 2 mm
Expected life
Conditions
Mechanical
Conditions for operation, transport and storage* 3
Min. 10 7
Ambient temperature: –50 ° C to +40 ° C –58 ° F to +104 ° F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight
Max. Operating speed
20 times/min. (at max. rating)
2 Form C: approx. 60g 2.12oz , 3 Form C: approx. 100g 3.53oz , 4 Form C: approx. 125g 4.41oz
Notes: *1. This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. For the AC coil types, the operate/release time will differ depending on the phase.
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
3. Electrical life
1) AC load
Voltage
Load
125V AC
Resistive load (A) (cos ? =1) Inductive load (A) (cos ? =0.4)
250V AC
Resistive load (A) (cos ? =1) Inductive load (A) (cos ? =0.4)
Expected life
— —
10
7.5
Min. 2 × 10 5
Current
10
5
1
7.5
3
0.7
7.5
3
0.6
5
2
0.4
Min. 5 × 10 5
Min. 10 6
Min. 2 × 10 6
Note: When the electromagnet or exciting coil (Solenoid, etc.) is the load, the value of motor or lamp load is applicable.
2) DC load
Voltage
Load
Resistive load (A)
24V DC
Inductive load (A)
Resistive load (A)
125V DC
Inductive load (A)
Expected life
—
7
—
—
Min. 2 × 10 5
Current
7.5
5
1
5
3
0.6
0.5
0.3
0.1
0.4
0.2
0.06
Min. 5 × 10 5
Min. 10 6
Min. 2 × 10 6
Notes: 1. For DC inductive loads, use an arc suppressing circuit.
2. Cautions at DC load use
When used under a DC load operating at high repetition rate with considerable arcing, corrosion of the contacts and/or the contact blades is likely to occur.
ASCTB81E 201201-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
相关PDF资料 |
PDF描述 |
|---|---|
| 1-1879456-4 | RES 12 OHM 2000W 5% WW LUG |
| HP3-M-DC12V | RELAY GEN PURPOSE 3PDT 10A 12V |
| ADUM2211TRWZ-RL | ISOLAT DGTL 5KVRMS 2CH 16SOIC-W |
| HP3-M-AC6V | RELAY GEN PURPOSE 3PDT 10A 6V |
| HP3-M-AC24V | RELAY GEN PURPOSE 3PDT 10A 24V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HP-3ML | 制造商:KODENSHI 制造商全称:KODENSHI KOREA CORP. 功能描述:Photo diodes |
| HP3-ML-AC100V | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:Relay for control panel of 10A (2c/3c/4c) Food processing packing machines |
| HP3-ML-AC115V | 制造商:NAIS 制造商全称:Nais(Matsushita Electric Works) 功能描述:10 AMP POWER RELAY |
| HP3-ML-AC200V | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:Relay for control panel of 10A (2c/3c/4c) Food processing packing machines |
| HP3-ML-AC220V | 制造商:NAIS 制造商全称:Nais(Matsushita Electric Works) 功能描述:10 AMP POWER RELAY |
发布紧急采购，3分钟左右您将得到回复。