- 您现在的位置：买卖IC网 > PDF目录21409 > HP2-TM-DC6V (Panasonic Electric Works)RELAY GEN PURPOSE DPDT 10A 6V PDF资料下载
参数资料
| 型号： | HP2-TM-DC6V |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 4/7页 |
| 文件大小： | 0K |
| 描述： | RELAY GEN PURPOSE DPDT 10A 6V |
| 其它有关文件： | General Appl Guidelines Standards Chart |
| 标准包装： | 20 |
| 系列： | HP |
| 继电器类型： | 通用 |
| 线圈类型： | 无锁存 |
| 线圈电流： | 240mA |
| 线圈电压： | 6VDC |
| 触点形式： | DPDT（2 C 型） |
| 触点额定值（电流）： | 10A |
| 切换电压： | 250VAC - 标称 |
| 关闭电压（最大）： | 4.8 VDC |
| 关闭电压（最小）： | 0.9 VDC |
| 安装类型： | 底座安装 |
| 端接类型： | 快速连接 - 0.205"（5.2mm） |
| 包装： | 散装 |
| 触点材料： | 银（Ag） |
| 操作时间： | 25ms |
| 释放时间： | 25ms |
| 线圈功率： | 1.5 W |
| 线圈电阻： | 25 欧姆 |
| 工作温度： | -50°C ~ 40°C |
HP
2. Speci?cations
Characteristics
Contact
Rating
Item
Arrangement
Contact resistance (Initial)
2 Form C, 3 Form C
Contact material
4 Form C
Nominal switching capacity
Min. switching capacity (Reference value)* 1
Insulation resistance (Initial)
Between open contacts
Speci?cations
2 Form C, 3 Form C, 4 Form C
Max. 15 m ? (By voltage drop 6 V DC 1A)
Ag
Ag alloy (cd free)
10A 250V AC (resistive load)
100mA 5V DC
Min. 100M ? (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,000 Vrms for 1min (2 Form C, 4 Form C).
2,000 Vrms for 1min (3 Form C) (Detection current: 10mA.)
Electrical
characteristics
Breakdown voltage
(Initial)
Between contact sets
Between contact and coil
1,500 Vrms for 1min (2 Form C, 4 Form C).
2,000 Vrms for 1min (3 Form C) (Detection current: 10mA.)
1,500 Vrms for 1min (2 Form C, 4 Form C).
2,000 Vrms for 1min (3 Form C) (Detection current: 10mA.)
Temperature rise (coil)
Operate time* 2
Release time* 2
Max. 65 ° C 149 ° F (By temperature method, at 40 ° C, nominal current)
Max. 25ms (2 Form C), Max.30ms (3 Form C, 4 Form C)
(Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 25ms (2 Form C), Max.30ms (3 Form C, 4 Form C)
(Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode)
Mechanical
characteristics
Shock resistance
Vibration resistance
Functional
Destructive
Functional
Destructive
Min. 98 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10 μ s.)
Min. 980 m/s 2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1 mm (Detection time: 10 μ s.)
10 to 55 Hz at double amplitude of 2 mm
Expected life
Conditions
Mechanical
Conditions for operation, transport and storage* 3
Min. 10 7
Ambient temperature: –50 ° C to +40 ° C –58 ° F to +104 ° F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight
Max. Operating speed
20 times/min. (at max. rating)
2 Form C: approx. 60g 2.12oz , 3 Form C: approx. 100g 3.53oz , 4 Form C: approx. 125g 4.41oz
Notes: *1. This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. For the AC coil types, the operate/release time will differ depending on the phase.
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
3. Electrical life
1) AC load
Voltage
Load
125V AC
Resistive load (A) (cos ? =1) Inductive load (A) (cos ? =0.4)
250V AC
Resistive load (A) (cos ? =1) Inductive load (A) (cos ? =0.4)
Expected life
— —
10
7.5
Min. 2 × 10 5
Current
10
5
1
7.5
3
0.7
7.5
3
0.6
5
2
0.4
Min. 5 × 10 5
Min. 10 6
Min. 2 × 10 6
Note: When the electromagnet or exciting coil (Solenoid, etc.) is the load, the value of motor or lamp load is applicable.
2) DC load
Voltage
Load
Resistive load (A)
24V DC
Inductive load (A)
Resistive load (A)
125V DC
Inductive load (A)
Expected life
—
7
—
—
Min. 2 × 10 5
Current
7.5
5
1
5
3
0.6
0.5
0.3
0.1
0.4
0.2
0.06
Min. 5 × 10 5
Min. 10 6
Min. 2 × 10 6
Notes: 1. For DC inductive loads, use an arc suppressing circuit.
2. Cautions at DC load use
When used under a DC load operating at high repetition rate with considerable arcing, corrosion of the contacts and/or the contact blades is likely to occur.
ASCTB81E 201201-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
相关PDF资料 |
PDF描述 |
|---|---|
| 1589H4D1 | POWER STRIP 11" 20A 4OUT 15'C |
| HP2-TM-DC24V | RELAY GEN PURPOSE DPDT 10A 24V |
| 218163-001 | CABLE 1 COND 12AWG SHIELDED |
| 1589H6D1BKRF | POWER STRIP 19" 20A 6OUT 15' |
| 1589H4G1 | POWER STRIP 11" 20A 4OUT 15'C |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HP3 | 制造商:BURNDY 功能描述:SUBMERSIBLE PUMP 750 GPM 制造商:NTE Electronics 功能描述:LED FLASHLIGHT BLK ALUM FOCUSING PENLIGHT,80 LUMEN,5.75 INCH LENGTH (2)AAA BATT |
| H-P3 | 制造商:EATON MOELLER 功能描述:TERMINAL PROTECTIVE COVER 制造商:EATON MOELLER 功能描述:TERMINAL PROTECTIVE COVER; Accessory Type:Terminal Shroud; For Use With:3-Pole Open Switch Disconnectors |
| HP-3 | 功能描述:集管和线壳 Obsolete RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| HP300 | 功能描述:安装硬件 HOLE PLUGS STEEL RoHS:否 制造商:Harwin 类型:SMT Cable Clip 材料:Phosphor Bronze 安装孔大小: 长度:5 mm 外径: 内径: 厚度: 电镀:Tin 螺纹大小: |
| HP-300 | 制造商:Taiyo Electric Ind. 功能描述: |
发布紧急采购，3分钟左右您将得到回复。