参数资料
| 型号： | B72570D120A60 |
| 厂商： | EPCOS Inc |
| 文件页数： | 16/22页 |
| 文件大小： | 0K |
| 描述： | CERADIODE 12VDC 20A 1003 |
| 产品培训模块： | Ceramic TVS |
| 产品目录绘图： | B72_1003 Series Side 1 B72_1003 Series Side 2 |
| 标准包装： | 1 |
| 系列： | CeraDiode |
| 变阻器电压： | 16V |
| 电流 - 浪涌： | 20A |
| 电路数： | 1 |
| 最大直流电压： | 12VDC |
| 封装/外壳： | 1003（2508 公制） |
| 产品目录页面： | 2358 (CN2011-ZH PDF) |
| 其它名称： | 495-3416-6 |
CeraDiodes
Standard series
5
5.1
Notes for proper soldering
Preheating and cooling
The average ramp-up rate must not exceed 3 ° C/s.
The cooling rate must not exceed 8 ° C/s.
5.2
Repair / rework
Manual soldering with a soldering iron must be avoided, hot-air methods are recommended for
making repairs.
5.3
Cleaning
All environmentally compatible agents are suitable for cleaning. Select the appropriate cleaning
solution according to the type of flux used. The temperature difference between the components
and cleaning liquid must not be greater than 100 ° C. Ultrasonic cleaning should be carried out
with the utmost caution. Too high ultrasonic power can impair the adhesive strength of the metal-
lized surfaces. Insufficient or excessive cleaning can be detrimental to CeraDiode performance.
5.4
Solder paste printing (reflow soldering)
An excessive application of solder paste results in too high a solder fillet, thus making the chip
more susceptible to mechanical and thermal stress. This will lead to the formation of cracks. Too
little solder paste reduces the adhesive strength on the outer electrodes and thus weakens the
bonding to the PCB. The solder should be applied smoothly to the end surface to a height of
min. 0.2 mm.
5.5
Selection of flux
Used flux should have less than or equal to 0.1 wt % of halogenated content, since flux residue
after soldering could lead to corrosion of the termination and/or increased leakage current on the
surface of the CeraDiode. Strong acidic flux must not be used. The amount of flux applied should
be carefully controlled, since an excess may generate flux gas, which in turn is detrimental to sol-
derability.
5.6
Storage
Solderability is guaranteed for one year from date of delivery, provided that components are
stored in their original packages.
Storage temperature:
Relative humidity:
25 ° C to +45 ° C
≤ 75% annual average, ≤ 95% on 30 days a year
The solderability of the external electrodes may deteriorate if SMDs are stored where they are ex-
posed to high humidity, dust or harmful gas (hydrogen chloride, sulfurous acid gas or hydrogen
sulfide).
Do not store SMDs where they are exposed to heat or direct sunlight. Otherwise the packing ma-
terial may be deformed or SMDs may stick together, causing problems during mounting.
After opening the factory seals, such as polyvinyl-sealed packages, it is recommended to use the
SMDs as soon as possible.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 22
相关PDF资料 |
PDF描述 |
|---|---|
| PWR4318WR750JE | RES 0.75 OHM 5% 2W WW 4318 SMD |
| B72570D0160H060 | CERADIODE 16V HISPEED 1003 SMD |
| PWR4318W75R0JE | RES 75 OHM 5% 2W WW 4318 SMD |
| PWR4318W1000JE | RES 100 OHM 5% 2W WW 4318 SMD |
| PWR4318W1R00JE | RES 1.0 OHM 5% 2W WW 4318 SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B72570D160H60 | 功能描述:ESD 抑制器 1003 16Vdc 3pF Ceradiode CDS4C16GTH RoHS:否 制造商:STMicroelectronics 通道:8 Channels 击穿电压:8 V 电容:45 pF 端接类型:SMD/SMT 封装 / 箱体:uQFN-16 功率耗散 Pd: 工作温度范围:- 40 C to + 85 C |
| B72580E0140K062 | 功能描述:VARISTOR 制造商:epcos (tdk) 系列:汽车级，AEC-Q200 包装:剪切带（CT） 零件状态:在售 变阻器电压:19.8V 压敏电压（典型）:22V 压敏电压（最大）:24.2V 电流 - 浪涌:800A 能量:2.3J 电路数:1 最大 AC 电压:14V 最大 DC 电压:18V 不同频率时的电容:4500pF @ 1kHz 工作温度:-55°C ~ 150°C（TA） 安装类型:表面贴装，MLCV 封装/外壳:1812（4532 公制） 标准包装:1 |
| B72580E0170K062 | 功能描述:VARISTOR 27V 800A 1812 制造商:epcos (tdk) 系列:汽车级，AEC-Q200 零件状态:在售 变阻器电压:24.3V 压敏电压（典型）:27V 压敏电压（最大）:29.7V 电流 - 浪涌:800A 能量:2.7J 电路数:1 最大 AC 电压:17V 最大 DC 电压:22V 不同频率时的电容:4000pF @ 1kHz 工作温度:-55°C ~ 150°C（TA） 安装类型:表面贴装，MLCV 封装/外壳:1812（4532 公制） 标准包装:1,500 |
| B72580E0200K062 | 功能描述:VARISTOR 制造商:epcos (tdk) 系列:汽车级，AEC-Q200 包装:剪切带（CT） 零件状态:在售 变阻器电压:29.7V 压敏电压（典型）:33V 压敏电压（最大）:36.3V 电流 - 浪涌:800A 能量:3.0J 电路数:1 最大 AC 电压:20V 最大 DC 电压:26V 不同频率时的电容:3000pF @ 1kHz 工作温度:-55°C ~ 150°C（TA） 安装类型:表面贴装，MLCV 封装/外壳:1812（4532 公制） 标准包装:1 |
| B72580E0250K062 | 制造商:TDK-EPC 功能描述:VARISTOR MULTILAYER 31VDC 1 制造商:TDK-EPC 功能描述:VARISTOR, MULTILAYER, 31VDC, 1812 制造商:TDK-EPC 功能描述:VARISTOR, MULTILAYER, 31VDC, 1812; Series:MLV E; Varistor Type:Multilayer Varistor (MLV); Peak Surge Current @ 8/20s:800A; Varistor Case:1812 [4532 Metric]; Clamping Voltage Vc Max:65V; Voltage Rating V DC:31V; Voltage Rating V ;RoHS Compliant: Yes 制造商:TDK-EPC 功能描述:Metal-Oxide Varistor 25Vrms 15mW 1812 |
发布紧急采购，3分钟左右您将得到回复。