参数资料
| 型号： | ALF1T24 |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | RELAY GEN PURPOSE SPST 20A 24V |
| 其它有关文件： | Standards Chart |
| 产品目录绘图： | ALF(G) Series ALF(G) Series Footprint ALF(G) Series Circuit |
| 标准包装： | 50 |
| 系列： | ALF |
| 继电器类型： | 通用 |
| 线圈类型： | 无锁存 |
| 线圈电流： | 37.5mA |
| 线圈电压： | 24VDC |
| 触点形式： | SPST-NO（1 A 型） |
| 触点额定值（电流）： | 20A |
| 切换电压： | 250VAC - 最小值 |
| 关闭电压（最大）： | 16.8 VDC |
| 关闭电压（最小）： | 2.4 VDC |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚，0.250 英寸快速连接 |
| 包装： | 散装 |
| 触点材料： | 银锡氧化物（AgSnO） |
| 操作时间： | 20ms |
| 释放时间： | 15ms |
| 线圈功率： | 900 mW |
| 线圈电阻： | 640 欧姆 |
| 工作温度： | -40°C ~ 60°C |
| 产品目录页面： | 2611 (CN2011-ZH PDF) |
| 其它名称： | 255-2634 ALF1T24-ND |
LF (ALF)
2. Speci?cations
Characteristics
Contact
Rating
Item
Contact material
Arrangement
Contact resistance (Initial)
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Nominal operating power
Min. switching capacity (reference value)* 1
Insulation resistance (Initial)
Speci?cations
AgSnO 2 type
1 Form A
Max. 100 m ? (By voltage drop 6 V DC 1A)
20A 250V AC
6,250VA
250V AC
25A
900mW
100mA, 5V DC
Min. 1,000M ? (at 500V DC) Measurement at same location as “Breakdown voltage” section.
Breakdown voltage
(Initial)
Between open contacts
Between contact and coil
1,000 Vrms for 1 min. (Detection current: 10 mA)
5,000 Vrms for 1 min. (Detection current: 10 mA)
Electrical
characteristics
Temperature rise (coil)
Surge breakdown voltage* 2
(Between contact and coil) (Initial)
Operate time (at nominal voltage) (at 20 ° C 68 ° F )
Release time (at nominal voltage) (at 20 ° C 68 ° F )
Max. 45 ° C 113 ° F (By resistive method, nominal coil voltage applied to the coil;
contact carrying current: 20A, at 60 ° C 140 ° F )
10,000 V
Max. 20 ms (excluding contact bounce time.)
Max. 15 ms (excluding contact bounce time) (With diode)
Mechanical
characteristics
Shock resistance
Vibration resistance
Functional
Destructive
Functional
Destructive
100 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10 μ s.)
1,000 m/s 2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10 μ s.)
10 to 55 Hz at double amplitude of 1.5 mm
Expected life
Conditions
Mechanical (at 180 times/min.)
Electrical (at 20 times/min.)
Conditions for operation, transport and storage* 3
Min. 2 × 10 6
Min. 10 5 (resistive load)
Ambient temperature: –40 ° C to +60 ° C –40 ° F to +140 ° F ,
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight
Max. operating speed
20 times/min. (at nominal switching capacity)
Approx. 23 g .81 oz
* Speci?cations will vary with foreign standards certi?cation ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ± 1.2 × 50 μ s according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
3. Switching capacity
Resistive load
20 A, 250 V AC (cos φ = 1)
25 A, 250 V AC (cos φ = 1)
Min. 10 5
(at 20 times/min.)
Min. 10 4
(at 20 times/min.)
Electrical Life
Compressor load
Inverter load
Inrush 70 A (cos φ = 0.7), Steady 20 A (cos φ = 0.9)
250 V AC
Inrush 200 A, Steady 20 A
100 V AC
Inrush 100 A, Steady 10 A
200 V AC
Min. 10 5
(at 20 times/min.)
Min. 3 × 10 4
(at 10 times/min.)
Min. 3 × 10 4
(at 10 times/min.)
REFERENCE DATA
1. Coil temperature rise
Sample: ALF1T12, 6 pcs.
Point measured: coil inside
Contact current: 20A
Ambient temperature: 25 ° C 77 ° F , 60 ° C 140 ° F
2-(1). 200V AC electrical life test
(200V AC, inverter load)
Sample: ALF1T12, 6 pcs.
Load: Inrush 102A (wave peak value),
Steady 14.4A (wave peak value)
70
158
60
140
25 ° C 77 ° F
60 ° C 140 ° F
Inverter dummy 200V AC
Switching frequency: ON 1s, OFF 5s
Circuit:
12
10
Contact welding: 0 times
Miscontact: 0 times
50
122
40
104
LF relay contact
8
Pick-up voltage
Max.
x
Min.
6
30
86
20
68
10
50
200V AC
1.9 ?
Switch
2,000 μ F
4
2
Drop-out voltage
Max.
x
Min.
0
32
80
100
120
0
0
3
6
Coil applied voltage, %V
No. of operations, × 10 4
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
ASCTB195E 201202-T
相关PDF资料 |
PDF描述 |
|---|---|
| OSTHA073050 | CONN TERM BLOCK 5.0MM 7POS PCB |
| OSTHA070050 | CONN TERM BLOCK 5.08MM 7POS PCB |
| OSTHX060080 | TERM BLOCK SPRING 5.00MM 6POS |
| OSTED063150 | CONN TERM BLOCK 6POS 3.81MM |
| CNY17F4M | OPTOCOUPLER PHOTOTRANS OUT 6DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ALF-1T24 | 制造商:Panasonic 功能描述:Bulk 制造商:Panasonic 功能描述:Electromechanical Relay SPST-NO 25A 24VDC 640Ohm Top Mount |
| ALF1T24T | 制造商:Panasonic Electric Works 功能描述: |
| ALF1TF12 | 功能描述:通用继电器 Class F Coil 12V RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| ALF1TF24 | 功能描述:通用继电器 Class F Coil 24V RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| ALF20C102EL400 | 功能描述:PRESSFIT 400V 1000UF -40/+85C 18 制造商:kemet 系列:ALF20 包装:散装 零件状态:在售 电容:1000μF 容差:±20% 电压 - 额定:400V ESR（等效串联电阻）:- 不同温度时的使用寿命:- 工作温度:-40°C ~ 85°C 极化:极化 等级:- 应用:通用 引线间距:- 大小/尺寸:- 高度 - 安装（最大值）:- 表面贴装焊盘尺寸:- 安装类型:通孔 封装/外壳:- 标准包装:36 |
发布紧急采购，3分钟左右您将得到回复。