参数资料
型号: AD5750-2BCPZ-RL7
厂商: Analog Devices Inc
文件页数: 1/36页
文件大小: 0K
描述: IC CURR/VOLT OUT DRVR 32LFCSP
标准包装: 1,500
放大器类型: 仪表
电路数: 1
转换速率: 2 V/µs
电流 - 电源: 5.2mA
电流 - 输出 / 通道: 24mA
电压 - 电源,单路/双路(±): ±12 V ~ 24 V
工作温度: -40°C ~ 105°C
安装类型: 表面贴装
封装/外壳: 32-VFQFN 裸露焊盘,CSP
供应商设备封装: 32-LFCSP(5x5)
包装: 带卷 (TR)
Industrial Current/Voltage Output Driver
with Programmable Ranges
Data Sheet
Rev. E
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother
rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
2009–2012 Analog Devices, Inc. All rights reserved.
FEATURES
Current output ranges: 4 mA to 20 mA, 0 mA to 20 mA, 0 mA
to 24 mA, ±20 mA, and ±24 mA
±0.03% full-scale range (FSR) total unadjusted error (TUE)
±5 ppm/°C typical output drift
Voltage output ranges: 0 V to 5 V, 0 V to 10 V, ±5 V, and ±10 V
with 20% overrange
±0.02% FSR TUE
±3 ppm/°C typical output drift
Flexible serial digital interface
On-chip output fault detection
Packet error checking (PEC)
Asynchronous CLEAR function
Flexible power-up condition to 0 V or tristate
Power supply range
AVDD: +12 V (± 10%) to +24 V (± 10%)
AVSS: 12 V (± 10%) to 24 V (± 10%)
Output loop compliance to AVDD 2.75 V
Temperature range: 40°C to +105°C
32-lead, 5 mm × 5 mm LFCSP package
APPLICATIONS
Process controls
Actuator controls
PLCs
GENERAL DESCRIPTION
The AD5750/AD5750-1/AD5750-2 are single-channel, low cost,
precision voltage/current output drivers with hardware- or
software-programmable output ranges. The software ranges are
configured via an SPI-/MICROWIRE-compatible serial interface.
The AD5750/AD5750-1/AD5750-2 target applications in PLC
and industrial process control. The analog input to the AD5750/
AD5750-1/AD5750-2 is provided from a low voltage, single-supply
digital-to-analog converter (DAC) and is internally conditioned
to provide the desired output current/voltage range. Analog input
ranges available are 0 V to 2.5 V (AD5750-1/AD5750-2) or 0 V
to 4.096 V (AD5750).
The output current range is programmable across five current
ranges: 4 mA to 20 mA, 0 mA to 20 mA, 0 mA to 24 mA, ±20 mA,
and ±24 mA. An overrange of 2% is available on the unipolar
current ranges.
Voltage output is provided from a separate pin that can be
configured to provide 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V
output ranges. An overrange of 20% is available on the voltage
ranges.
Analog outputs are short-circuit and open-circuit protected and
can drive capacitive loads of 1 F and inductive loads of 0.1 H.
The devices are specified to operate with a power supply range
from ±12 V to ±24 V. Output loop compliance is 0 V to AVDD
2.75 V.
The flexible serial interface is SPI and MICROWIRE compatible
and can operate in 3-wire mode to minimize the digital isolation
required in isolated applications. The interface also features an
optional PEC feature using CRC-8 error checking, useful in
industrial environments where data communication corruption
can occur.
The devices also include a power-on-reset function, ensuring that
the devices power up in a known state (0 V or tristate), and an
asynchronous CLEAR pin that sets the outputs to a zero scale/mid-
scale voltage output or the low end of the selected current range.
The HW SELECT pin is used to configure the parts for hardware
or software mode on power-up.
Table 1. Related Devices
Part Number
Description
Single channel, 16-bit, serial input current
source and voltage output DAC
Industrial I/V output driver, single supply, 55 V
maximum supply, programmable ranges
Single channel, 16-bit, serial input, 4 mA to
20 mA current source DAC
相关PDF资料
PDF描述
AD5751ACPZ-REEL7 IC I/V OUTPUT DRIVER 60V 32LFCSP
AD582SD IC AMP SAMPLE HOLD 25MA 14CDIP
AD585SQ IC AMP SAMPLE HOLD 50MA 14CDIP
AD602AR IC AMP VGA DUAL LN 50MA 16SOIC
AD603AR IC AMP VGA 90MHZ LN 50MA 8SOIC
相关代理商/技术参数
参数描述
AD5750ACPZ 功能描述:IC CURR/VOLT OUT DVR 32LFCSP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:1 系列:- 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.028 V/µs 增益带宽积:105kHz -3db带宽:- 电流 - 输入偏压:3nA 电压 - 输入偏移:100µV 电流 - 电源:3.3µA 电流 - 输出 / 通道:12mA 电压 - 电源,单路/双路(±):2.7 V ~ 12 V,±1.35 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-TSSOP(0.173",4.40mm 宽) 供应商设备封装:14-TSSOP 包装:剪切带 (CT) 其它名称:OP481GRUZ-REELCT
AD5750ACPZ-REEL 功能描述:IC CURR/VOLT OUT DVR 32LFCSP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:100 系列:- 放大器类型:通用 电路数:1 输出类型:- 转换速率:0.2 V/µs 增益带宽积:- -3db带宽:- 电流 - 输入偏压:100pA 电压 - 输入偏移:30µV 电流 - 电源:380µA 电流 - 输出 / 通道:- 电压 - 电源,单路/双路(±):±2 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:8-SOIC(0.154",3.90mm 宽) 供应商设备封装:8-SO 包装:管件
AD5750ACPZ-REEL7 功能描述:IC CURR/VOLT OUT DVR 32LFCSP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:100 系列:- 放大器类型:通用 电路数:1 输出类型:- 转换速率:0.2 V/µs 增益带宽积:- -3db带宽:- 电流 - 输入偏压:100pA 电压 - 输入偏移:30µV 电流 - 电源:380µA 电流 - 输出 / 通道:- 电压 - 电源,单路/双路(±):±2 V ~ 18 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:8-SOIC(0.154",3.90mm 宽) 供应商设备封装:8-SO 包装:管件
AD5750BCPZ 功能描述:IC CURR/VOLT OUT DVR 32LFCSP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:150 系列:- 放大器类型:音频 电路数:2 输出类型:- 转换速率:5 V/µs 增益带宽积:12MHz -3db带宽:- 电流 - 输入偏压:100nA 电压 - 输入偏移:500µV 电流 - 电源:6mA 电流 - 输出 / 通道:50mA 电压 - 电源,单路/双路(±):4 V ~ 32 V,±2 V ~ 16 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP(0.173",4.40mm 宽) 供应商设备封装:8-TSSOP 包装:管件
AD5750BCPZ-REEL 功能描述:IC CURR/VOLT OUT DVR 32LFCSP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:73 系列:Over-The-Top® 放大器类型:通用 电路数:4 输出类型:满摆幅 转换速率:0.07 V/µs 增益带宽积:200kHz -3db带宽:- 电流 - 输入偏压:1nA 电压 - 输入偏移:285µV 电流 - 电源:50µA 电流 - 输出 / 通道:25mA 电压 - 电源,单路/双路(±):2 V ~ 44 V,±1 V ~ 22 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-WFDFN 裸露焊盘 供应商设备封装:16-DFN-EP(5x3) 包装:管件