- 您现在的位置：买卖IC网 > PDF目录16465 > A3977SLPTR (Allegro Microsystems Inc)IC MOTOR DRVR PWM DUAL 28TSSOP PDF资料下载
参数资料
| 型号： | A3977SLPTR |
| 厂商： | Allegro Microsystems Inc |
| 文件页数： | 10/19页 |
| 文件大小： | 0K |
| 描述： | IC MOTOR DRVR PWM DUAL 28TSSOP |
| 标准包装： | 4,000 |
| 应用： | 步进电机驱动器 |
| 输出数： | 1 |
| 电流 - 输出： | ±2.5A |
| 电压 - 负载： | 8 V ~ 35 V |
| 电源电压： | 3 V ~ 5.5 V |
| 工作温度： | -20°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-SOIC（0.173"，4.40mm 宽）裸露焊盘 |
| 供应商设备封装： | 28-TSSOP 裸露焊盘 |
| 包装： | 带卷 (TR) |
A3977
Microstepping DMOS Driver with Translator
Applications Information
Layout.
The printed wiring board should use a heavy ground
plane.
For optimum electrical and thermal performance, the
driver should be soldered directly onto the board.
The load supply terminal, V BB , should be decoupled
with an electrolytic capacitor (>47 μ F is recommended)
placed as close to the device as possible.
To avoid problems due to capacitive coupling of the
high dv/dt switching transients, route the bridge-output
traces away from the sensitive logic-input traces. Always
drive the logic inputs with a low source impedance to in-
crease noise immunity.
Grounding. A star ground system located close to the
driver is recommended.
The 44-lead PLCC has the analog ground and the
power ground internally bonded to the power tabs of the
package (leads 44, 1, 2, 11 – 13, 22 – 24, and 33 – 35).
On the 28-lead TSSOP package, the analog ground
(lead 7) and the power ground (lead 21) must be con-
nected together externally. The copper ground plane located
under the exposed thermal pad is typically used as the star
ground.
Current Sensing. To minimize inaccuracies caused by
ground-trace IR drops in sensing the output current level,
the current-sense resistor (R S ) should have an independent
ground return to the star ground of the device. This path
should be as short as possible. For low-value sense resis-
tors the IR drops in the printed wiring board sense resistor ’s
traces can be signi ? cant and should be taken into account.
The use of sockets should be avoided as they can introduce
variation in R S due to their contact resistance.
Allegro MicroSystems recommends a value of R S
given by
R S = 0.5/I TRIP max
Thermal Protection. Circuitry turns off all drivers when
the junction temperature reaches 165°C, typically. It is
intended only to protect the device from failures due to
excessive junction temperatures and should not imply that
output short circuits are permitted. Thermal shutdown has a
hysteresis of approximately 15°C.
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
10
相关PDF资料 |
PDF描述 |
|---|---|
| A3977SLP | IC MOTOR DRVR PWM DUAL 28TSSOP |
| A3977SEDTR | IC MOTOR DRIVER PWM DUAL 44PLCC |
| ESC15DRTN | CONN EDGECARD 30POS DIP .100 SLD |
| A3977SED | IC MOTOR DRIVER PWM DUAL 44PLCC |
| M1DXK-1640K | IDC CABLE - MKR16K/MC16F/X |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A3977SLPTRCUT | 制造商:Allegro MicroSystems LLC 功能描述: |
| A3977SLPTR-T | 功能描述:IC MOTOR DRVR PWM DUAL 28TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 电机和风扇控制器，驱动器 系列:- 标准包装:1 系列:- 应用:步进电机驱动器，1-2 相，2 相 评估套件:- 输出数:1 电流 - 输出:800mA 电压 - 负载:10 V ~ 28 V 电源电压:4.75 V ~ 5.25 V 工作温度:-20°C ~ 90°C 安装类型:表面贴装 封装/外壳:28-SOP + 2 翼片裸露焊盘 供应商设备封装:28-HSOPHC（15.2x7.9） 包装:剪切带 (CT) 其它名称:869-1268-1 |
| A3977XED | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Microstepping DMOS Driver with Translator |
| A3977XLP | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Microstepping DMOS Driver with Translator |
| A3979 | 制造商:ALLEGRO 制造商全称:Allegro MicroSystems 功能描述:Microstepping DMOS Driver with Translator |
发布紧急采购，3分钟左右您将得到回复。