参数资料
型号: 71M6515H-DB
厂商: Maxim Integrated Products
文件页数: 64/66页
文件大小: 0K
描述: BOARD DEMO 71M6515H ENERGY METER
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 1
主要目的: 电源管理,电度表/功率表
嵌入式:
已用 IC / 零件: 71M6515H
已供物品: 2 个板,线缆,CD,电源
71M6515H Demo Board User’s Manual
Digital Pin Description - Pins labeled RESERVED are not to be connected. Unless otherwise indicated, all
inputs and outputs are standard CMOS. Inputs do NOT have internal pull-ups or pull-downs.
Name
CKTEST
D0 to D7
PULSE4
PULSE3
PULSE_INIT
BAUD_RATE
IRQZ
MUXSYNC
Pin No.
6
42,21…23,
37…39,33
15
14
40
16
41
25
Type
I/O
I/O
O
O
I
I
O
O
Description
Clock PLL output. Can be enabled and disabled by CKOUT_DSB (see
Status Mask).
Input/output pins 0 through 7. These pins should not be floated if configured as input
pins.
The fourth pulse generator output
The third pulse generator output
The pulse output initial power-up voltage
The UART baud rate (1: 38.4kbd, 0: 19.2kbd)
Interrupt output, low active. A falling edge indicates the end of a measurement frame,
as well as alarms. Rises when status word is read.
Falls at beginning of conversion cycle for IA.
Chip reset: Input pin with internal pull-up resistor, used to reset the
RESETZ
47
I
chip into a known state. For normal operation, this pin is set to 1. To
reset the chip, this pin is driven to 0 for 5 microseconds.
Enables the UART when 0. The UART is disabled when this pin is set
UARTCSZ
34
I
to 1. A positive pulse on this pin will reset the UART. No external reset
circuitry is necessary for power-up reset.
High-Speed Synchronous Interface (SSI). If SRDY is not used, it should be tied low.
SRDY
SFR
SSCLK
SSDATA
RX
TX
24
9
5
8
44
4
I
O
O
O
I
O
SSI optional handshake input.
SSI frame pulse output, one SSCLK wide.
SSI clock output (5MHz or 10MHz selectable).
SSI data output, changes on the rising edge of SSCLK.
UART serial Interface receiver input.
UART serial Interface transmitter output.
2,10,11,12,
RESERVED
13,17,18,19,
20,26,28,29,
N/A
These pins must not be connected
30,31,32,43,
64
TMUXOUT
RPULSE
WPULSE
3
36
35
O
O
O
Digital output test multiplexer. Controlled by TMUX[2:0].
Selectable pulse output (default: VARh pulse).
Selectable pulse output (default: Wh pulse).
Table 4-4: 71M6515H Pin Description Table 2/2
Revision 2.0
? Copyright 2005 TERIDIAN Semiconductor Corporation
64 of 66
相关PDF资料
PDF描述
71M6521FE-DB BOARD DEMO FOR 71M6521FE
71M6531F-DB BOARD DEMO 71M6531F
71M6533-DB BOARD DEMO 71M6533
71M6534H-DB BOARD DEMO 71M6534H
71M6541F-DB DEMO BOARD 71M6541F
相关代理商/技术参数
参数描述
71M6515H-IGT 制造商:Maxim Integrated Products 功能描述:METERING FRONT END - Rail/Tube
71M6515H-IGT/F 功能描述:计量片上系统 - SoC Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6515H-IGTR 制造商:Maxim Integrated Products 功能描述:71M6515H-IGT - T/REEL - Tape and Reel 制造商:Maxim Integrated Products 功能描述:Metering Systems on a Chip - SoC Energy Meter IC
71M6515H-IGTR/F 功能描述:计量片上系统 - SoC Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6515H-IGTW/F 功能描述:计量片上系统 - SoC Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel