- 您现在的位置：买卖IC网 > Datasheet目录942 > 625022-000 (TE Connectivity)D-110-00 Datasheet资料下载
参数资料
| 型号： | 625022-000 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | D-110-00 |
| 标准包装： | 500 |
| 类型： | 线至线 |
| 直径： | 0.059"（1.5mm） |
| 长度： | 0.406"（10.31mm） |
| 颜色： | 透明蓝 |
| 其它名称： | A104787 |
SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
APPLICATION
1. Part will recover to 0.76 (0.03) .
2. This part is designed to meet the requirements as shown below when tested to Raychem Specification RT-1404.
QUALIFICATION TEST ASSEMBLIES
The test configuration shall be a follow-through splice made by connecting two wires having 26 AWG tin or silver plated
conductors and insulations rated for at least 125 ° C.
REQUIREMENTS:
Temperature Rating
Voltage Drop**
Tensile Strength*
Vibration**
Temperature Cycling**
Current Cycling**
Heat Aging*
Fluid Resistance*
Corrosion Resistance*
Corrosive Effect*
150 ° C
Initial 25 millivolts max.
7 lbs. min.
MIL-STD-202, Method 204, Condition D
Voltage Drop after Vibration - 32 millivolts max.
-63 ± 3 ° C to 150 ± 3 ° C, 5 cycles (Condition C)
Voltage Drop after Cycling - 32 millivolts max.
Voltage Drop after Cycling - 32 millivolts max.
120 ± 2 hours at 200 ± 3 ° C.
20 hours at 25 ± 3 ° C in fluids of MIL-H-5606, MIL-I-7808, and MIL-L-9236.
96 hours at 35 ± 3 ° C (Condition A).
Voltage Drop after test - 32 millivolts max
16 hours at 121 ± 2 ° C, Non-corrosive
* For test procedures, see Raychem Specification RT1404.
** For test procedures, see page 2.
300 Constitution Drive
Menlo Park, CA 94025, USA
DEVICES
TITLE:
SOLDERSLEEVE
1.47 (0.058) I.D. MINIATURE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.:
D-110-00
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D000141
REPLACES:
n/a
DRAWN BY:
M. FORONDA
DATE:
22-Mar-00
PROD. REV.:
P
DOC ISSUE:
1
SCALE:
None
SIZE:
A
SHEET:
1 of 2
If this document is printed it becomes uncontrolled. Check for the latest revision.
相关PDF资料 |
PDF描述 |
|---|---|
| 625026-000 | TERMINATOR SOLDER PAK WIRE |
| 625044-000 | SOLDER PAK WIRE TERMINATORS |
| 625045-000 | TERMINATOR SOLDER PAK WIRE |
| 625127-000 | SOLDER PAK WIRE TERMINATORS |
| 625159N004 | D-110-35CS1290 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 6250220004 | 制造商:TE Connectivity 功能描述:D-110-00CS1290 |
| 625022N003 | 功能描述:焊料和屏蔽管 D-110-00CS706 RoHS:否 制造商:TE Connectivity / Raychem 类型:Shield Terminators 材料:Polyvinylidene Fluoride 内径:5.08 mm 长度:16.5 mm 最低收缩温度: 系列:S03 |
| 625-024 | 制造商:MISCELLANEOUS 功能描述: |
| 6250250000 | 制造商:SES 功能描述:PLIOCUT A |
| 625-025-262-012 | 功能描述:D-Sub标准连接器 D-SUB PLUG RoHS:否 制造商:Omron Electronics 位置/触点数量:9 排数:2 型式:Female 安装风格:Through Hole 安装角:Right 端接类型:Solder 过滤: |
发布紧急采购，3分钟左右您将得到回复。