- 您现在的位置：买卖IC网 > Datasheet目录602 > 62201-8611 (Molex Connector Corporation)TOOL HAND R/A RCPT/HDR 6COL 7ROW Datasheet资料下载
参数资料
| 型号： | 62201-8611 |
| 厂商： | Molex Connector Corporation |
| 文件页数： | 3/4页 |
| 文件大小： | 0K |
| 描述： | TOOL HAND R/A RCPT/HDR 6COL 7ROW |
| 其它有关文件： | Overlap Style Insulation Crimps |
| 标准包装： | 1 |
| 系列： | GbX I-Trac™ |
| 工具类型： | 插入工具 |
| 其它名称： | 062201-8611 062201-8611-E 0622018611 0622018611-E 62201-8611-E 622018611 622018611-E |
I-Trac? Daughtercard and RAM Press-In Tool
Press Equipment Recommendations
Many types of presses can be used to install I-Trac? connectors, but to assure consistent connector installation
Molex recommends the following press criteria:
1. The capability to detect force variations as low as 4.5kg (10 lb) during the press-in cycle; excessive force
measurements should stop the press-in cycle.
2. The rate of pressing can be regulated as low as 0.13mm (0.005 in) per second.
3. Press stroke control to within 0.25mm (0.010 in).
4. Total press stroke must be at least 19mm (0.75 in).
5. For statistical purposes, automatic collection of force and distance data.
Tool Operation
1. Carefully insert, by hand, Daughtercard and / or RAM module(s) into the PCB hole pattern.
2. Place the application tool on top of the module with the back guide surface of the tool against the back of the
Daughtercard module. See Figure 2.
GUIDE SURFACE
Figure 2
3. Using the application tool and an appropriate press, seat the module until there is less than 0.10mm (.004 in)
clearance between the bottom of the plastic housing and the surface of the PCB. See Figure 3.
0.10
.004
MAX
Figure 3
(Daughtercard shown; same dimensions for RAM)
There should be no broken stand-offs along the perimeter of the part (an indication of over-pressing).
Doc No: ATS-622018611
Revision: F
Release Date: 09-15-06
Revision Date: 02-18-09
UNCONTROLLED COPY
Page 3 of 4
相关PDF资料 |
PDF描述 |
|---|---|
| 62201-8612 | TOOL HAND RA RCPT/HDR 10COL 7ROW |
| 63600-0478 | TOOL IDT HAND TOOL HANDLE |
| 63811-0200 | TOOL HAND CRIMP PROTOTYPE 1.25MM |
| 63811-1575 | LOCATOR DIE FOR T0130 SERIES |
| 63811-2100 | TOOL CRIMP 14-18 (2)18AWG MALE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 62201-8612 | 功能描述:手工工具 PRESS-IN TOOL 7 ROW ROW 10 COLUMN D-CARD RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 62201-8613 | 功能描述:手工工具 PRESS-IN TOOL 5 ROW W 5 COLUMN BACKPLANE RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 62201-8614 | 功能描述:手工工具 PRESS-IN TOOL 5 ROW 10 COLUMN BACKPLANE RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 62201-8615 | 功能描述:手工工具 PRESS-IN TOOL 5 ROW TOOL 5 ROW 5 COLUMN RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 62201-8616 | 功能描述:手工工具 PRESS IN TOOL 5 ROW TOOL 5 ROW 10 COLUMN RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
发布紧急采购，3分钟左右您将得到回复。