- 您现在的位置：买卖IC网 > PDF目录19194 > 58541-1 (TE Connectivity)TOOL PRO-CRIMPER II W/DIE SET PDF资料下载
参数资料
| 型号： | 58541-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | TOOL PRO-CRIMPER II W/DIE SET |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III 型，多配接 II 型 |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 背板和圆形触点，14-18 AWG 和 22-24 AWG |
| 特点： | 侧面插入，棘齿 |
| 产品目录页面： | 431 (CN2011-ZH PDF) |
| 配用： | 201580-3-ND - CONTACT SKT 20-24AWG CRIMP GOLD 1-201328-4-ND - CONTACT SKT 20-24AWG CRIMP GOLD A25132-ND - CONN PIN 20-24AWG GOLD CRIMP A25541-ND - CONN SOCKET 20-24AWG GOLD CRIMP A25114-ND - CONN PIN 20-24AWG GOLD CRIMP A25116-ND - CONN SOCKET 20-24AWG GOLD CRIMP A25142-ND - CONN SOCKET 14AWG GOLD CRIMP A25141-ND - CONN PIN 14AWG GOLD CRIMP A25539-ND - CONN SOCKET 16-18AWG GOLD CRIMP A25540-ND - CONN PIN 16-18AWG GOLD CRIMP 更多... |
| 其它名称： | A30235 |
408-4051
Nut
Locator
Locator
Assembly
Tool Frame
Chamfer
Chamfer
Insulation
Crimper
189456-1
Die Retaining
Pins
Wire Crimper
189457-1
Wire Anvil
189455
Chamfer
Insulation Anvil
189454-1
Die Retaining
Screws
Figure 2
Reasons for reissue are provided in Section 10,
REVISION SUMMARY.
2. DESCRIPTION (Figure 1 and Figure 2)
The tool features a tool frame with a stationary jaw
and handle, a moving jaw, a moving handle, and an
adjustable ratchet that ensures full contact crimping.
The tool frame holds a die assembly with two crimping
sections.
The die assembly features a wire anvil, an insulation
anvil, a wire crimper, and an insulation crimper.
Attached to the outside of the frame is a locator
assembly.
Die retaining pins and die retaining screws are used to
position and secure the dies in the tool frame. A nut is
used on the lower die retaining screw to hold the
locator assembly in place.
3. INSTALLATION AND REMOVAL OF DIE SET AND
LOCATOR ASSEMBLY (Figure 2)
1. Open the tool handles and remove the two die
retaining screws from the tool jaws.
2. Place the wire anvil and insulation anvil so that
their chamfered sides and their marked surfaces
face outward, when mounted in the moving jaw of
the tool frame.
3. Insert the two die retaining pins.
4. Insert the long die retaining screw through the
jaw and through both anvil dies, and tighten the
Rev D
screw just enough to hold the dies in place. Do not
tighten the screw completely at this time.
5. Place the wire crimper and insulation crimper so
that their chamfered sides and their marked
surfaces face outward, when mounted in the
stationary jaw of the tool frame.
6. Insert the two die retaining pins.
7. Insert the short die retaining screw through the
jaw and through both crimper dies, and tighten the
screw just enough to hold the dies in place. Do not
tighten the screw completely at this time.
8. Carefully close the tool handles, making sure that
the anvils and crimpers align properly. Continue
closing the tool handles until the ratchet in the tool
frame has engaged sufficiently to hold the anvils
and crimpers in place, then tighten both die
retaining screws.
9. Place the locator assembly over the end of the
long screw, and position the locator assembly
against the side of the tool jaw.
10. Place the nut onto the end of the long screw and
tighten the nut enough to hold the locator assembly
in place.
11. To disassemble, close the tool handles until the
ratchet releases, remove the nut, the locator
assembly, the two die retaining screws, and the four
die retaining pins, and slide the anvils and crimpers
out of the tool jaws.
2 of 4
相关PDF资料 |
PDF描述 |
|---|---|
| 210-6MSTFD | SWITCH RAISED ACTUATOR 6 SEC |
| 210-8ES | SWITCH EXTENDED ACTUATOR 8 SEC |
| 210-8LPS | SWITCH SPST 8 SEC LOW PROF |
| 210-7MSTFD | SWITCH RAISED ACTUATOR 7 SEC |
| 608868-1 | TOOL HAND HANDLE&HEAD FOR SUB D |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 5854111 | 制造商:Dialight 功能描述:LED Uni-Color Red 630nm 2-Pin |
| 585-4111 | 功能描述:LED替换灯-基于LED MIN BAY BASED LED RED 6V RoHS:否 制造商:Chicago Miniature 照明颜色:Red 光强度: 电压额定值:115 V 封装: |
| 5854113 | 制造商:Dialight 功能描述:LED Uni-Color Red 630nm 2-Pin |
| 585-4113 | 功能描述:LED替换灯-基于LED MIN BAY BASED LED RED 14V RoHS:否 制造商:Chicago Miniature 照明颜色:Red 光强度: 电压额定值:115 V 封装: |
| 5854115 | 制造商:Dialight 功能描述:LED Uni-Color Red 630nm 2-Pin |
发布紧急采购，3分钟左右您将得到回复。