参数资料
型号: 56-77-9G
厂商: Aavid Thermalloy
文件页数: 9/116页
文件大小: 0K
描述: INSULATOR
标准包装: 1,000
材质: 云母
其它名称: 034816
How To Select a Heat Sink
How to select a heat sink
The basic equation for heat transfer or power dissipation may be stated as follows:
PD =
Δ T
Σ R θ
Where:
PD = the power dissipated by the semiconductor device in watts.
Δ T = the temperature difference of driving potential which causes the flow of heat.
Σ R θ = the sum of the thermal resistances of the heat flow path across which Δ T exists.
The above relationship may be stated in the following forms:
PD =
TJ–TA
R θ JC + R θ CS + R θ SA
PD =
TC–TA
R θ CS + R θ SA
PD =
TS–TA
R θ SA
Where:
TJ = the junction temperature in ° C (maximum is usually stated by the manufacturer of the semiconductor device).
TC = case temperature of the semiconductor device in ° C.
TS = temperature of the heat sink mounting surface in thermal contact with the semiconductor device in ° C.
TA = ambient air temperature in ° C.
R θ JC = thermal resistance from junction to case of the semiconductor device in ° C per watt
(usually stated by manufacturer of semiconductor device).
R θ CS = thermal resistance through the interface between the semiconductor device
and the surface on which it is mounted in ° C per watt.
R θ SA = thermal resistance from mounting surface to ambient or thermal resistance of heat sink in ° C per watt.
The above equations are generally used to determine the required thermal resistance of the heat sink (R θ SA),
since the heat dissipation, maximum junction and/or case temperature, and ambient temperature are known or set.
Figure 1 indicates the location of the various heat
flow paths, temperatures and thermal resistances.
FIGURE 1
Mounting surface
(cooler/dissipator)
Interface
Atmosphere
or ambient
The common practice is to represent the system with
a network of resistances in series as shown in Figure 2.
FIGURE 2
Junction
(heat source)
T
A
TJ
TC
TS
TA
P
D
P
D
Semiconductor case
R θ JC
R θ CS
R θ SA
R
θ CS
R
θ SA
Heat flow path mounting
surface to ambient, equation (3)
R
θ JC
T
J
T
T
C
S
Heat flow path case
to ambient equation (2)
Heat flow path junction
to ambient, equation (1)
T
A
AMERICA
USA Tel: +1 (603) 224-9988 email: info@aavid.com
ASIA
Singapore Tel: +65 6362 8388 email: sales@aavid.com.sg
www.aavidthermalloy.com
EUROPE
Italy Tel: +39 051 764011 email: sales.it@aavid.com
United Kingdom Tel: +44 1793 401400 email: sales.uk@aavid.com
Taiwan Tel: +886(2) 2698-9888 email: sales@aavid.com.tw
9
相关PDF资料
PDF描述
560017-000 CABLE 20AWG SHIELDED
5601-22-127-200 CABLE SATA POWER 15POS 8"
5602-11-0000-000 CABLE SATA SIGNL 7POS R/A-R/A 1M
5602-12-0142A-500 CABLE SATA 3.0 R/A-ST 0.50M
562A032-25/225-0 BOOT MOLDED
相关代理商/技术参数
参数描述
5677A 功能描述:测试引线 USE 565-5677B RoHS:否 制造商:Pomona Electronics 设备类型:Patch Cords 连接器类型:Banana plug (stackable) on both ends 长度:60 in 颜色:Black
5677B 功能描述:测试引线 DELUXE MULTI-USE RoHS:否 制造商:Pomona Electronics 设备类型:Patch Cords 连接器类型:Banana plug (stackable) on both ends 长度:60 in 颜色:Black
5677-SL002 制造商:Alpha Wire 功能描述:
5678 制造商:RAF Electronic Hardware 功能描述:SPRING, EXTENSION, 204N, 222.3MM; Body Length:222.3mm; Extended Length:54mm; Extension Load Max:204N; External Diameter:14.27mm; Wire Diameter:2.34mm ;RoHS Compliant: Yes
5678 SL001 功能描述:多芯电缆 26AWG 7C SHIELD 1000ft SPOOL SLATE RoHS:否 制造商:Alpha Wire 导体数量:3 线规 - 美国线规(AWG):16 绞合:19 x 29 屏蔽:Shielded 长度:100 ft 电压额定值:600 V 外壳材料:Polytetrafluoroethylene (PTFE) 绝缘材料:Polytetrafluoroethylene (PTFE) 类型:Communication and Control