参数资料
| 型号： | 4-5-9490LE |
| 厂商： | 3M (TC) |
| 文件页数： | 3/4页 |
| 文件大小： | 0K |
| 描述： | TAPE ADHESIVE TRANSFER 4"X5YD |
| 产品培训模块： | Laminating Adhesive Families Tapes PSA Technology 101 |
| MSDS 材料安全数据表： | 9475LE(X),9490LE(x),9495LE MSDS |
| 标准包装： | 1 |
| 系列： | 9490LE |
| 胶带类型： | 双涂层，双面 |
| 胶合剂： | 丙烯酸，300LSE；丙烯酸，300MP |
| 背衬，载体： | 载体 - 聚酯，内衬 - 聚乙烯涂层牛皮纸 |
| 厚度： | 0.0067"（6.7 mils，0.170mm） |
| 厚度 - 胶合剂： | 0.0062"（6.2 mils，0.157mm） |
| 厚度 - 背胶，载体，衬垫： | 0.0005"（0.5 mils，0.013mm） |
| 宽： | 4.00"（101.60mm）1/3' |
| 长度： | 15'（4.6m）5 码 |
| 颜色： | 透明 |
| 使用： | 保持，连接，安装 |
| 包装： | 散装 |
3M ? High Strength Double Coated Tape
with Adhesives 300LSE and 200MP
9496LE
Features
Application
Techniques
Environmental
Performance
? This tape has a moisture resistant polycoated kraft liner which can withstand high
humidity conditions with minimal cockling or wrinkling.
? This tape has a film liner which can add dimensional stability to foams and other
substrates and also makes it easier to handle the tape during slitting and die-cutting.
? Features a dual liner for ease in selective die-cutting.
? The bond strength of 3M? Adhesive 300LSE increases as a function of time and
temperature, and has very high initial adhesion.
Bond strength is dependent upon the amount of adhesive to surface contact developed.
Firm application pressure and moderate heat, from 100°F (38°C) to 130°F (54°C), will
assist the adhesive in developing intimate contact with the bonding surface.
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well
unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane. *
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape
application to surfaces at temperatures below 50°F (10°C) is not recommended because
the adhesive becomes too firm to adhere readily. However, once properly applied, low
temperature holding is generally satisfactory.
* Carefully read and follow the manufacturer’s precautions and directions for use when
working with solvents. These cleaning recommendations may not be compliant with
the rules of certain Air Quality Management Districts in California; consult applicable
rules before use.
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
Humidity Resistance: High humidity has minimal effect on adhesive performance.
No significant reduction in bond strength is observed after exposure for seven days at
90°F (32°C) and 90% relative humidity.
UV Resistance: When properly applied, nameplates and decorative trim parts are not
adversely affected by exposure to direct sunlight.
Water Resistance: Immersion in water has no appreciable effect on the bond
strength. After 100 hours at room temperature, the high bond strength is maintained.
Temperature Cycling Resistance: High bond strength is maintained after cycling
four times through:
4 hours at 158°F (70°C)
4 hours at -20°F (-29°C)
4 hours at 73°F (22°C)
Chemical Resistance: When properly applied, nameplate and decorative trim parts
will hold securely after exposure to numerous chemicals including oil, mild acids and
alkalis.
-3-
相关PDF资料 |
PDF描述 |
|---|---|
| 3600B/20 100 | CABLE 20 COND 100FT SHLD TWST PR |
| 3/4-5-4008W | TAPE URTHANE FOAM 3/4" X 5YD |
| NBE-10567 | BOX NEMA ABS 15.68X11.73X6.3 IN |
| 11675-6 | PWR DISTRIB BLOCK 6POS 40A 250V |
| G3S-201PL-PD-US DC5 | RELAY SSR 1.2A 5VDC PCB |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 4-5-9490LE (CASE OF 2) | 功能描述:3M 9490LE DOUBLE COATED TAPE - 4 制造商:3m (tc) 系列:9490LE 零件状态:在售 温度范围:200°F（93°C） 标准包装:2 |
| 459492-2 | 功能描述:折皱器 CRIMPER WIRE O RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 459492-4 | 功能描述:折皱器 CRIMPER WIRE O RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 459492-5 | 功能描述:折皱器 CRIMPER WIRE O RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 459492-7 | 功能描述:折皱器 CRIMPER WIRE O RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
发布紧急采购，3分钟左右您将得到回复。