- 您现在的位置：买卖IC网 > PDF目录222111 > 19N413 SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 0.1A, 28VDC, PANEL MOUNT PDF资料下载
参数资料
| 型号： | 19N413 |
| 元件分类： | 开关 |
| 英文描述： | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 0.1A, 28VDC, PANEL MOUNT |
| 文件页数： | 3/4页 |
| 文件大小： | 210K |
| 代理商： | 19N413 |
Technical Information
Ordering Information
Sealed Variants
This variant is available in two versions, fully sealed and top sealed. The top seal incorporates a
rubber seal around the button to stop the ingress of contaminants through this area. If the
switch is to be activated by a cam, it would be advisable to do this via a lever, as using a cam
directly onto the button can cause damage to the diaphragm seal.
The fully sealed version has the top seal and also has integral leads ‘potted’ onto the terminals.
This version is rated at 125°C. There is also a derated version, to 105°C, available. This has the
advantage of being lower cost than the standard version. If you should require more
information on this version please contact the Sales Office.
Note
* L18 represents that this lever is 18mm long (see product drawing). Non standard leaf lever lengths are available in 1mm
increments from 18mm to 63mm. You may specify required lever length from between 18mm to 63mm as a non standard
option. If required, please reference the Sales Office.
Mounting Information
PCB Terminal version
This version mounts directly onto a PCB which has been drilled as illustrated. To ensure a tight
fit in the PCB during handling and flow soldering operations, the switch can be inserted into
the PCB, and then the terminals may be splayed by 30° in an alternate fashion. The terminals
have an in-line rectangular cross section to facilitate this, and to eliminate the reduction of
creepage distances in the fitted application.
Solder, QC and flying lead versions
These versions have two mounting holes that accept M2,5 screws (with anti-vibration washers
if relevant) tightened to a maximum torque of 0,3Nm. One of the mounting holes is slotted, to
allow for a tolerance between the screw centres of ±0,15mm. If the switch is being mounted
onto a metal surface, a separating insulator is recommended on the solder and QC versions, to
ensure bare wires cannot make electrical contact.
PCB Layout
(viewed from either side)
Terminal Style
Solder
4
PCB
5
QC
6
Integral wire leads
7
Contact Material
Silver
0
Gold
1
Button Op/Release Force
Op force
Rel force
Unsealed button
0,5N
0,07N
1
Sealed button
2,0N
0,27N
2
Unsealed button
1,5N
0,27N
3
Auxiliary Actuator Fitted
None fitted
(leave blank)
Standard leaf lever
L18
Standard roller lever
R15
19N
All dimensions
in Millimetres
Series 19N 4 page (11114)
27 07 2000
5:30 pm
Page 4
相关PDF资料 |
PDF描述 |
|---|---|
| 19N702 | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 3A, 28VDC, PANEL MOUNT |
| 1B3M501-003 | PUSHBUTTON SWITCH, SPDT, MOMENTARY, 0.2A, 50VDC, THROUGH HOLE-RIGHT ANGLE |
| 1BD006-12210-000 | SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 0.1A, 12VDC, SURFACE MOUNT-RIGHT ANGLE |
| 1BT001-14100-001 | KEYPAD SWITCH, SPST, MOMENTARY-TACTILE, 0.02A, 15VDC, 1.27 N, SURFACE MOUNT-STRAIGHT |
| 1BT001-1440L-001 | KEYPAD SWITCH, SPST, MOMENTARY-TACTILE, 0.02A, 15VDC, 1.67 N, SURFACE MOUNT-STRAIGHT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 19N502 | 制造商:ITW Switches 功能描述:MICROSWITCH V4 PLUNGER 制造商:ITW Switches 功能描述:MICROSWITCH, V4, PLUNGER 制造商:ITW Switches 功能描述:MICROSWITCH, V4, PLUNGER; Contact Configuration:SPDT; Microswitch Type:Snap Action; Actuator Style:Plunger; Switch Operation:On-(On); Operating Force Max:2N; Contact Voltage AC Nom:250V; Contact Voltage DC Nom:28V; Contact Current ;RoHS Compliant: Yes 制造商:ITW Switches 功能描述:Switch Snap Action N.O./N.C. SPDT Plunger PC Pins 5A 250VAC 28VDC 2N Thru-Hole |
| 19N502L18 | 制造商:ITW Switches 功能描述:MICROSWITCH V4 LEVER 制造商:ITW Switches 功能描述:MICROSWITCH, V4, LEVER |
| 19N502L63 | 制造商:ITW Switches 功能描述:MICROSWITCH V4 LONG LEVER 制造商:ITW Switches 功能描述:MICROSWITCH, V4, LONG LEVER |
| 19N502R15 | 制造商:ITW Switches 功能描述:MICROSWITCH V4 ROLLER LEVER 制造商:ITW Switches 功能描述:MICROSWITCH, V4, ROLLER LEVER 制造商:ITW Switches 功能描述:MICROSWITCH, V4, ROLLER LEVER; Contact Configuration:SPDT; Microswitch Type:Snap Action; Actuator Style:Roller Lever; Switch Operation:-; Operating Force Max:2N; Contact Voltage AC Nom:250V; Contact Voltage DC Nom:28V; Contact ;RoHS Compliant: Yes 制造商:ITW Switches 功能描述:Switch Snap Action N.O./N.C. SPDT Roller Lever PC Pins 5A 250VAC 28VDC Thru-Hole |
| 19N503 | 制造商:ITW Switches 功能描述:MICROSWITCH V4 PCB PLUNGER 制造商:ITW Switches 功能描述:Switch Snap Action N.O./N.C. SPDT Plunger PC Pins 5A 250VAC 28VDC 2N Thru-Hole |
发布紧急采购，3分钟左右您将得到回复。