- 您现在的位置：买卖IC网 > PDF目录1292 > 142-1000-033 (Emerson Network Power Connectivity Johnson)CONN SMK HERMETIC SEAL FEEDTHRU PDF资料下载
参数资料
| 型号： | 142-1000-033 |
| 厂商： | Emerson Network Power Connectivity Johnson |
| 文件页数： | 3/3页 |
| 文件大小： | 0K |
| 描述： | CONN SMK HERMETIC SEAL FEEDTHRU |
| 产品目录绘图： | 142-1000-033 |
| 标准包装： | 25 |
| 系列： | SMK |
| 附件类型： | 真空密封 |
| 适用于相关产品： | SMK 连接器 |
| 特点： | 馈通 |
| 产品目录页面： | 467 (CN2011-ZH PDF) |
| 其它名称： | J688 |
SMK - 50 Ohm Connectors (2.92mm)
INCHES (MILLIMETERS) ?
SMK Solder Type Straight Plugs For Semi-rigid Cable
1
BEAD
CONTACT
VISE STOP
COUPLING NUT
BODY
SEAL RING
CABLE SOLDERING VISE
P/N 140-0000-962
BEAD
ASSEMBLY
TOOL
2
2
3
4
1
2
3
3
4
Identify connector parts (5 piece parts) and tools (5 tools.)
Strip cable jacket and dielectric to dimension shown.
Place center contact onto center conductor. Slide con-
tact soldering tool onto contact. Clamp the cable con-
tact and tool into cable soldering vise and solder con-
tact to center conductor. High temperature solder,
such as 95/5 Sn/Ag is recommended so that contact
solder joint remains stable during body soldering op-
eration. Solder paste is recommended for the contact
solder joint to minimize excess solder. The assembled
dimension should be as shown.
Remove excess solder from contact with a sharp blade
and clean contact. Check for presence of excess sol-
der by sliding body soldering tool over the contact. Re-
move soldering tool.
5
6
BEAD
CABLE SOLDERING VISE
VISE STOP
5
6
Place connector nut and body on cable. Place con-
nector body soldering tool over contact and thread the
coupling nut and connector body rmly to the tool. Place
cable subassembly into cable soldering vise. Clamp
cable and soldering tool securely to insure the cable
dielectric expansion will not disturb the cable in the vise
during soldering. Place hot soldering iron on the con-
nector body sleeve and apply solder from the opposite
side. A low temp solder, such as 60/40 Sn/Pb is rec-
ommended for the body solder joint. Allow the soldered
joint to cool and remove from xture. Check contact
location to the body. The best electrical results are
achieved when the contact location is within a toler-
ance of .060 +/- .001.
Place bead onto neck portion of the tool. Thread Bead
Assembly tool rmly into the coupling nut. Push the
tool's plunger between your thumb and ngers to as-
semble the bead. Check bead location. Assemble seal
ring onto body.
145-0693-001/002 145-0694-001/002
TOOL
BEAD ASSEMBLY TOOL
.000 - .005 RECESSION
BEAD TO BODY
PLUNGER
Semi-Rigid Cable Vise
Vise Stop
Bead Assy. Tool
Contact Soldering Tool
Body Soldering Tool
Cable Clamp Insert
(FOR .086 SEMI-RIGID)
140-0000-962
140-0000-968
140-0000-957
140-0000-960
140-0000-958
140-0000-964
(FOR .141 SEMI-RIGID)
140-0000-962
140-0000-968
140-0000-957
140-0000-961
140-0000-959
140-0000-965
Emerson Network Power Connectivity Solutions
299 Johnson Avenue SW, Waseca, MN 56093 ? 800 -247- 8256 ? +1 (507) 833-8822 ? www.EmersonConnectivity.com
相关PDF资料 |
PDF描述 |
|---|---|
| 142-1901-821 | CONN SMA ADAPTER PLUG-JACK |
| 142246 | CONN ADAPTER SMB PLUG-TO-PLUG |
| 142248 | CONN ADAPTER SMB R/A PLUG-JACK |
| 142250 | CONN ADAPTER SMB JACK-JACK BLKHD |
| 14295 | MAXI-CON DUST COVER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 142-1000-036 | 制造商:Johnson Components 功能描述:- Bulk |
| 142-1002-0001 | 功能描述:RF 连接器 PLUG,RTANGLESOS RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 142-1002-0001 / | 制造商:TE Connectivity 功能描述:142-1002-0001=PLUG,RTANGLESOS |
| 1421004-06 | 制造商:QUALTEK 功能描述: 制造商:Qualtek Electronics Corporation 功能描述: |
| 142101 | 功能描述:RF 连接器 SMB ST CABLE PLUG RG179 75 OHM NICKEL RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
发布紧急采购，3分钟左右您将得到回复。