- 您现在的位置：买卖IC网 > PDF目录1086 > 142-0408-011 (Emerson Network Power Connectivity Johnson)CONN SMA PLUG STRGHT 50 OHM GOLD PDF资料下载
参数资料
| 型号： | 142-0408-011 |
| 厂商： | Emerson Network Power Connectivity Johnson |
| 文件页数： | 1/3页 |
| 文件大小： | 0K |
| 描述： | CONN SMA PLUG STRGHT 50 OHM GOLD |
| 标准包装： | 5 |
| 系列： | SMA |
| 连接器类型： | SMA |
| 连接器类型： | 插头，公引脚 |
| 触点终端： | 压接和焊接 |
| 阻抗： | 50 欧姆 |
| 安装类型： | 自由悬挂 |
| 紧固型： | 有螺纹 |
| 缆线组： | RG-55，142，223，400 |
| 频率 - 最大： | 12.4GHz |
| 包装： | 散装 |
| 产品目录页面： | 465 (CN2011-ZH PDF) |
| 其它名称： | J813 |
SMA 50 Ohm
Straight Crimp Type Plug (3-piece) -
Solder or Crimp Captivated Contact
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
CABLE
TYPE
RG-55/U, 142, 223, 400
VSWR &
FREQ. RANGE
1.15 + .01 f (GHz) 0-12.4 GHz
GOLD
PLATED
142-0408-011
NICKEL
PLATED
142-0408-016
“A”
.706 (17.93)
CABLE GROUP
RG-55/u, 142, 223, 400
PART NUMBER
142-0408-011/016
CRIMP HEX
.213 (5.41)
1. Identify connector parts. (3 piece parts - except bulkhead)
2. Strip cable to dimensions shown. Do not nick braid or center conductor. Tin center conductor if contact will be solder attache d. Do not
tin center conductor if contact is to be crimp attached. When stripping LMR-100 low loss cable, remove foil back to where cabl e jacket
is stripped. A wire stripper of correct size is recommended for this step. Slide heat shrink (as applicable) and crimp sleeve onto jacket
of cable.
3. Assemble contact onto cable as shown.
Solder Attachment: Solder contact to center conductor through solder hole using .020 (0.51) diameter solder. Use a minimum
amount of solder for a good joint.
Crimp Attachment: Crimp contact to center conductor using Johnson Components TM Hand Tool 144-0000-910, setting #2, with
positioner 141-0000-907. Crimp location should be centered between end of contact and X-hole. Crimp attachment to solid cente r
conductor cables is not recommended.
4. Flare braid and slide body assembly over contact and under braid. Then seat body assembly firmly onto contact. The cable may have
to be held in a clamping fixture. Arrange braid uniformly around crimp stem. Slide crimp sleeve forward and crimp using recom mended
crimp tool. Slide heat shrink forward and shrink (as applicable).
Emerson Network Power Connectivity Solutions
299 Johnson Avenue SW, Waseca, MN 56093 ? 800 -247- 8256 ? +1 (507) 833-8822 ? www.EmersonConnectivity.com
相关PDF资料 |
PDF描述 |
|---|---|
| 142-0408-101 | CONN SMA PLUG R/A RG142 CRIMP AU |
| 142-0435-001 | CONN SMA PLUG STRT CRIMP GOLD |
| 142-0435-101 | CONN PLUG RIGHT ANGLE CRIMP GOLD |
| 142-0439-001 | CONN SMA PLUG STRT CRIMP GOLD |
| 142-0439-101 | CONN PLUG RIGHT ANGLE CRIMP GOLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 142-0408-016 | 功能描述:RF 连接器 STRT PLG 142/400 Ni RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 142-0408-101 | 功能描述:RF 连接器 R/A PLG RG55/142 GLD RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 142-0408-102 | 制造商:JOHNSON 功能描述: |
| 142-0408-106 | 功能描述:RF 连接器 SMA Plug R/A RG142 RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 1420-43 | 制造商:LEGAMASTER 功能描述:NOTICE BOARD CORK 60X90CM |
发布紧急采购，3分钟左右您将得到回复。