参数资料
型号: 0638160250
厂商: Molex Inc
文件页数: 25/36页
文件大小: 0K
描述: TOOL CRIMP BATTERY POWERED 220V
标准包装: 1
系列: PremiumGrade™
工具类型: 手动压接器,电池供电 - 无压接头
配用: WM5252-ND - CRIMP MODULE HEAD FOR 0638238300
WM5249-ND - TOOL MOD HEAD CRIMP 0638238200
相关产品: WM4483-ND - ADAPTER CRIMP FOR BAT-PWR TOOL
其它名称: 063816-0250
63816-0250
638160250
WM4481
Battery Powered Crimping Tool
2.
3.
4.
Remove the locking pins (2) from the battery powered crimp yoke.
Place the modular crimp head into the yoke and push down until it engages into the slot of the adapter. The Power
Crimp Heads do not require a separate Power Crimp Adapter.
Replace the locking pins (2) making sure the modular crimp head or the Power Crimp Head are secure. The locking
pins can be inserted from either side of the yoke. See Figure 3-1.
WARNING: Electric shock hazard :
This tool is not insulated. When using this unit near energized electrical lines, use proper personal protective
equipment.
Failure to observe this warning could result in severe injury or death
WARNING: Wear eye protection when operating or servicing this tool.
Failure to wear eye protection could result in serious eye injury from flying debris or hydraulic oil.
3.2 Operation
WITH LOCATOR
TYPE 2C AND 4C
TYPE 4A
MODULAR CRIMP HEAD
WITH LOCATOR
TYPE 4A
POWER CRIMP
ADAPTER
HOLD TRIGGER
DOWN
TERMINAL
AND WIRE
IN PLACE
TERMINAL
AND WIRE
IN PLACE
HOLD TRIGGER
DOWN
POWER CRIMP HEAD
WITH LOCATOR
Figure 3-2
1. Insert the proper terminal or connector into the tooling nest and push on the trigger in the handle just enough so the dies
contact the terminal or connector securely. Release the trigger. This allows the operator to make adjustments to the
connector before the final termination. See Figure 3-2.
2. Insert the wire or cable into the terminal. Push on the wire or cable to assure it is fully seated in the terminal.
3. Hold the trigger down again until the crimping tool achieves pressure relief, which is accompanied by an audible “pop”.
The crimping operation can be interrupted at any time during the cycle by releasing the trigger.
4. The crimping cycle is complete when the dies are completely closed and the maximum crimping force is reached. The
dies will automatically release and will go back to their original position.
Note: In case of an error or emergency, the ram can be retracted before the crimping cycle is complete. To do this push
the retractor slide towards the battery. See Figure 3-1.
Warning : An incomplete crimp can cause a fire.
Use proper die, connector, and cable combinations. Improper combinations can result in an incomplete crimp.
The relief valve will sound to indicate a completed crimp. If you do not hear the sound of the relief valve, the crimp is
not complete. Failure to observe these warnings could result in severe injury or death.
Order No: TM-638160200
Revision: F
Release Date: 12.06-07
Revision Date: 04-18-14
UNCONTROLLED COPY
Page 25 of 36
相关PDF资料
PDF描述
NTD20N06T4G MOSFET N-CH 60V 20A DPAK
NTD18N06LT4G MOSFET N-CH 60V 18A DPAK
88970043 CONTROL LOGIC 8I/O 120V DIN MNT
WC-GVH2630 TOOL HAND CRIMP GVH 26-30AWG
ASVMPC-14.7456MHZ-LR-T OSC 14.7456 MHZ CMOS MEMS SMD
相关代理商/技术参数
参数描述
0638160300 功能描述:TOOL CRIMP HEAD HAND BATTERY PWR RoHS:是 类别:工具 >> 压接器,施用器,压力机 - 配件 系列:- 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B
0638160500 功能描述:AIR BENCH ADAPTER WITH FOOT SW RoHS:是 类别:工具 >> 压接器,施用器,压力机 - 配件 系列:- 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B
0638160600 功能描述:ADAPTER CRIMP FOR BAT-PWR TOOL RoHS:是 类别:工具 >> 压接器,施用器,压力机 - 配件 系列:- 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B
0638160700 功能描述:AIR POWERED CRIMP ADAPTER RoHS:是 类别:工具 >> 压接器,施用器,压力机 - 配件 系列:- 标准包装:1 系列:- 其它名称:512A512A-NDQ1137690B
0638160800 制造商:Molex 功能描述:TYPE 4D POWER CRIMP HEAD - Bulk