Tartan ?
Utility Filament Tape
8934
Technical Data
Product Description
June, 2009
Tartan? Utility Filament Tape 8934 is a glass filament reinforced tape for light
duty strapping, bundling and reinforcing. It has a synthetic rubber resin adhesive
with good adhesion to most fiberboard surfaces, and a variety of plastics and metal
surfaces.
Construction
Backing
3M? Scotchpro? film
Adhesive
Pressure sensitive
Reinforcement
Glass yarn
Backing Color
Clear
synthetic rubber-resin
Typical Physical
Properties
Note: The following technical information and data should be considered representative
or typical only, and should not be used for specification purposes.
ASTM Test Method
Adhesion to Steel:
Tensile Strength:
Elongation at Break:
Total Thickness:
60 oz./in. width (65 N/100 mm width)
100 lbs./in. width (1750 N/100 mm width)
3%
4 mil (0.11 mm)
D-3330
D-3759
D-3759
D-3652
Features
? Abrasion and moisture resistant.
? High tensile strength.
? Allows printing and illustrations to
be seen through the tape.
? Good shear and initial adhesion.
? Good aging.
? Protection of filaments and adhesive
to provide longer package life.
? Less tape needed at lower cost for
applications where high tensile strength
is a main requirement.
? Good holding under wide range of
application conditions with minimum
amount of tape.
? Holds with minimum rub-down.
? Boxes remain closed for long period
of time.
Available Sizes
Standard Widths:
Core Size (ID):
Lengths:
9 mm, 12 mm, 18 mm, 24 mm, 36 mm, 48 mm, 72 mm
3 in.
55 m
