1590 Kauffman Road
Landisville, PA 17538-1499
Phone: 717-898-4302
Rev. A
29Oct2007
CHARACTERISTICS OF SILICONE FUSION TAPE
The following values are typical performance data and are not intended to be used as design data.
PROPERTY
TEST METHOD
PERFORMANCE
Operating Temperature Range:
Continuous
-60
oC to 200oC
Intermittent
-65
oC to 260oC
Specific Gravity
ASTM D792
1.2
Hardness, Durometer, Shore A
ASTM D2148
Room-cured - 24 Hours
50
Cured at 300
oF - 24 Hours
70
Cured at 480
oF - 24 Hours
75
Tensile Strength, psi, minimum
ASTM D119
700
Elongation, %, minimum
ASTM D119
300
Tear Strength, ppi, minimum
ASTM D624, Die B
Bond Strength, pounds, minimum
MIL CID-A-A-59163
2 (1” width)
Adhesion, inches unwind, maximum
ASTM D2148
3
Cold Brittle Point,
oC, maximum
ASTM D746
-65
Water Absorption, % max., by weight
MIL CID-A-A-59163
3
Dielectric Strength, volts/mil, minimum
MIL CID-A-A-59163
Thickness 0.020 Inch
400
Thickness 0.030 Inch
400
Thickness 0.040 Inch
300
Thickness 0.050 Inch
275
Thickness 0.060 Inch
250
Thickness 0.080 Inch
200
Dielectric Constant, 1 KHz
ASTM D150
2.95
Dissipation Factor, 1 KHz
ASTM D150
<0.0004
Volume Resistivity, ohms/cm, minimum
MIL CID-A-A-59163
3x10
14
We hope this is of some benefit. If you have additional questions or comments, please contact the Tyco Electronics
Product Information Center at 800-522-6752.
